Laz valve with Jenni kraig hammer oil or grease

[Psycho91]

As the title states should I grease my laz valve or will the tried and true oil in the asa work, I had this thought cause the want to run a Jenni kraig hammer and its derlin and your not supposed to oil or grease it, if I cant just oil it build plans may change

[BrickHaus]

The valve itself comes greased. In my expierence, you don't want to mix the two as oil will thin out and wash out your grease.

I don't think it'll get to the hammer if you put oil in the asa, it's not like a tippmann where your hammer will get sprayed with oily blowback gas.

I'd say grease. And leave the hammer dry as it's delrin.

[superman]

you can use the stock hammer, if you are concerned with it.

[Psycho91]

Does the Jenni kraig make a big difference or is just a for feel kinda thing, does it actually allow for lower pressures

[superman]

It just allows for a lighter main spring and to reduce the LPR pressure.

[latches109]

The valve itself comes greased.

All of the laz laves I have bought had ZERO lubrication. Eclipse grease has been working well for me, and without the u-cup oring leak so far.

[BrickHaus]

Hmm. Mine came greased. With a white grease. I was literally about to take it apart, and noticed it was good to go.

[Psycho91]

Yeah my valve came greased but not much or the lube is just shitty lube