Other frames on Resurrection body.

[DieManInTheRough]

Is the only difference the screw placement?
Does everything else line up?
Want to do a build using Trilogy SF frame on Ressi body, but haven't been able to get clear info other than "They don't fit".

[Fossilhead]

I think it has to do with the 3-way placement on the front block and the slot in the frame.

Don't know about the SF frame.
But for standard frames, guys trying to put on CCM frames... There's been issues.

[Jordan]

Grip frame screw spacing is different - one is in the right spot, so you'd need to drill and tap the other one, I'm just not sure which one at the moment.

The threads on the Ressy are different - 8-32 IIRC - and there's a boss machined on the body that would need to be removed to mount a WGP frame.

And lastly, as mentioned, the 3way "height" is different. Inception Designs used different trigger plates to make their frames universal and compensate for the difference. I believe Empire plates put the timing rod hole higher in the slot and WGP plate were lower.

[DieManInTheRough]

Noted, looks like the only part in the SF that will need deep modification is the "trigger plate". Luckily I have 2 examples and should be able to get one cut locally. Thank you very much for the info!