Cosmetic repairs dye i5

[tygersrule]

What is the best way to re-glue these little rubber pieces to this dye i5? Is just regular super glue OK or is there something specific I should use to avoid further damaging the mask?

[Ecapnation]

True the glue goop.... But it will eventually come off again

[Drcemento]

Weldwood contact cement. I use this for replacing foam on masks and putting new EVA foam bumpers on my older JT masks. done correctly the foam will break down before the glue does. get a small brush - paint BOTH sides with a thin layer. let dry till it looses sheen and push together - hard. - good as new. This is pretty typically how they do it at the factory. super glue will hold but not for long, as its a very brittle glue.

[Grendel]

Aquaseal - neoprene glue is what I have used with great success with paintball soft goods repairs. I used to use it a lot with wetsuits and my foldable kayak for making watertight repairs.

You do need to clean off the old gunk (sanding works) so the glue can bond with the fabric.

[tygersrule]

Thanks for all the answers appreciate yall

[Trbo323]

Aquaseal - neoprene glue is what I have used with great success with paintball soft goods repairs. I used to use it a lot with wetsuits and my foldable kayak for making watertight repairs.

You do need to clean off the old gunk (sanding works) so the glue can bond with the fabric.

I use this as well, it works really well but definitely follow the directions

Sent from my motorola edge 2024 using Tapatalk

[Chuck E Ducky]

I have always used Superglue but I use the jell kind.