ULE detention compatibility

[Chemical-x.....ahain]

Is the ULE detent the same as a WGP?

[superman]

no they are different.
Ule is M10x1.0
Autococker 3/8-24

[Tracker]

visually they are super hard to tell the threads apart, and they will act like they want to thread into each other but they bind

3/8-24 converted to metric would be M9.53x1.058 "just close enough to almost work"

[DocsMachine]

The ULS's use first-gen WDP Angel detents. I happen to have some in stock, although in a ULE, you need to use a slightly thicker O-ring than is supplied for Angel use.

Doc.

[The Inflicted]

The ULS's use first-gen WDP Angel detents. I happen to have some in stock, although in a ULE, you need to use a slightly thicker O-ring than is supplied for Angel use.

Doc.

Will this cause ball breakage if you don't?

[Jordan]

Will this cause ball breakage if you don't?

Pretty sure they stick out into the breech too far if you don't. So more of a clearance issue with the bolt.

[Tinybear]

I have had one of my past ULE mags with the detent spun in too far and I ended up shooting bits of detent out the barrel. Thankfully was testing after cleaning at home not at a field.