Cp on/off leak

[The Hobbit]

Anyone have a diagram for how the guys of a cp on/off are supposed to be? The one I stripped down for ano is leaking out of the vent hole and I can’t say for certain i reassembled it correctly.

thanks

[JohnB]

https://youtu.be/dT1SbYZeSgc?si=58Xh0TWTmXKGLLwS

[JohnB]

Direct mount but imagine the inner bits aren’t too different between the two

[The Hobbit]

Direct mount but imagine the inner bits aren’t too different between the two

Yeah I’d imagine they’re all pretty similar.

thanks

[Trbo323]

If it's coming out the vent hole that's probably your tank o ring as that ring should be in front of the hole

Worth checking to make sure though, if something is wrong it could make it so the tank can't screw in far enough

Sent from my motorola edge 2024 using Tapatalk

[The Hobbit]

If it's coming out the vent hole that's probably your tank o ring as that ring should be in front of the hole

Worth checking to make sure though, if something is wrong it could make it so the tank can't screw in far enough

Sent from my motorola edge 2024 using Tapatalk

Same tank sealed on a different gun, also with cp on/off.
I’ll check that every thing is seated correct.

[Trbo323]

Hold up. Is this the vent hole at the front? I may be thinking of a ASA that also has one in the back for the tank to vent out of if you unscrew it.

If so, disregard the tank ring, it's fine

One of the parts in the dovetail ASA is a disc that has an o ring in the center, if that disk is flipped backwards it changes where that o ring is positioned and I'd bet it would vent.

The video above, the internals have the same concepts but they are definitely different than the dovetail versions

Sent from my motorola edge 2024 using Tapatalk

[Trekkie]

You can look it up on youtube i guess..