Old Style On/Off Issues

[masterchiefmurph]

I typically run by cockers at a high input pressure of 750-800 psi or so but when it comes time to degas the marker it almost never does until I unscrew the tank a little bit.
I also have a problem with inception asas not moving the pub enough and the tank just bleeds air forever.
I understand this may be a tank issue and I have greased the older asa but it seemingly dosent do anything. Could the oring be too big? I’m at a loss.


Sent from my iPhone using Tapatalk

[JohnB]

The pin in the tank seems too long if it is doing funny things with multiple asas. Maybe try a different tank reg or tank reg pin to id if it’s the tank or the asas.

[flyweightnate]

I don't think those old ASAs purged. It was helpful going on, not so much going off.

Try putting a tank oring in the inception ASA before your tank for a quick depth fix.

[masterchiefmurph]

Neat trick, I cant remember seeing a purge hole.


Sent from my iPhone using Tapatalk

[k_obeastly]

turn air off, fire a few shots.