Who de-gasses their cf tanks every time and if not how long do you feel comfortable keeping pressure in them?
De-gas every time?
Collapse
X
-
Tags: None
-
I do the opposite and make sure theyre all filled before I leave the field. That way I have air for tech work later.Velcor will save us...
Current MCB Feedback : https://www.mcarterbrown.com/forum/b...opusx-feedback
Legacy MCB Feedback (Wayback Machine) -
-
I was told to always leave them filled. The pressure will keep out moisture. I was told this by a paintballer that was also a scallop diver, who said the same thing goes for scuba tanks.
I put 10k psi in my tanks to make extra sure there is no humidity getting in, just flex seal the bust disks first.😎Comment
-
-
-
Leave it in there. If you come back to your tank a month later and it's empty you know you have a problem
Sent from my motorola edge 2024 using Tapatalk
I use Tapatalk which does NOT display comments. If you want me to see it, make it a post not a comment.
Feedback
https://www.mcarterbrown.com/forum/b...323-s-feedbackComment
-
Not to beat a
, but i will post my 2 cents. I leave them all filled. Fill them before leaving the field.
Comment
-
I horde air. Every time I hit the field I bring a bunch of tanks and fill them all before I leave. Precious teching air! At least until I get my scuba tanks recertifed and filled.Comment
-
I just got a small compressor for tec work it’s a game changer. -
Chuck E Ducky - something I need to look into when my budget allows!
-
Ok that's what I always do too. Top up all the tanks so I have air to fiddle with at home. I just started overthinking and wondered if that was doing any harm. Once the 2 I sent off to hydro get back then I'll really have a good air stash.Comment
-
I am comfortable keeping air in a hpa tank for quite some time. I even have a co2 tank with vintage co2 from the 90's.Comment
-
They are meant to hold pressure not to hold empty. You are stress cycling the cylinder when you de gas, which fatigues the materials.
These cylinders are designed to be neglectfully stressed so they only really fail for other reasons. So it doesn't matter but technically you are making the cylinder closer to its point of failure.
Also you are potentially exposing the cylinder to more moisture from outside air that again is not desirable.
As long as you never put oil in the fill nipple and the reg is screwed on all the way you should be good.Comment
-
This is my answer. Keepeing them filled keeps other things out of them.They are meant to hold pressure not to hold empty. You are stress cycling the cylinder when you de gas, which fatigues the materials.
These cylinders are designed to be neglectfully stressed so they only really fail for other reasons. So it doesn't matter but technically you are making the cylinder closer to its point of failure.
Also you are potentially exposing the cylinder to more moisture from outside air that again is not desirable.
As long as you never put oil in the fill nipple and the reg is screwed on all the way you should be good.
I've only had one burst disk pop at home... in the middle of the night... that was fun.
*over 20 yearsComment
Comment