2k Sniper Cocking Issue

[RPP]

Ive got a 2k RF sniper setup with a cocking issue that I dont know the best remedy for.

-Stock 2k bolt
-Inception Drift kit
-Stock Back Block
-Lower tube is CCM with a regular hex cocking rod.

The rearward stroke of the cycle moves the bolt too far back. Ive moved the cocking rod set in as far as it will go and threaded the pump rod into the backblock as much as it will go, but the positioning of the bolt does not maintain a straight ball stack. Its better right now, but before those adjustment it would cause clipping issues with the ball stack.

What am i missing? What is the best method to fix this issue ?

[superman]

If the pump kit is moving too far back you can put something in the guide rod to shorten that stroke length. that is a better option than doing it with the cocking rod. The cocking rod will bottom out on the lug slot.

[RPP]

superman That sounds like the perfect solution. Thank you!

[I Missed On Purpose]

A chunk of macro line usually is an easy thing to toss in, is the bolt clearing the feedneck as it cocks and then it goes too far and sear kinda catches on front of hammer? The cocking rod hex part can be adjusted farther back so it cocks later in the pump stroke and less threaded on back block will change how far back bolt goes in allowed pump stroke, pics would help as well