ANS GenX with Benchmark frame

[otar]

Just picked this up and will be hopefully getting it back in order and out on the field soon.

Just wanted to show off and see if anyone had any info on exactly what I've got and what's going on with the benchmark ASA stuff. I found it interesting the velocity adjuster is held in place by the beavertail screw and must adjust a second piece internally.

So far the ram is leaking bad, so I'll post more photos when I disassemble it all.

PXL_20261028_004915394.MP.jpg
PXL_20261028_004947306.MP.jpg
PXL_20261028_004935012.MP.jpg
PXL_20261028_004958578.MP.jpg

[Walker]

Pre2k Autococker, the velocity adjuster slides in and is held in place by that screw. It is not threaded for the screw in type IVG.

Benchmark drops were common at the time. You can get an asa that mounts to the dovetail and the thumbscrews lock it in place. You can switch it to either side and it makes the tank offset accordingly.