Welcome to MCB! The most popular and active paintball forum on the internet. Thank you for stopping by!
If this is your first visit, please take a moment to check out the FAQ by clicking the link above. You will need to register before you can post. Simply click the Register link above to get started.
To begin browsing, select a forum from the list below.
It is just a physics problem. There really isn't enough airflow. There are a few options and the best option IMO is contacts
1. Contacts
2. Ex-fog
3. Youzee (and clones) inserts
Ive tried them all. Contacts are the best. I specifically mostly wear contacts for paintball. By far the best decision I have made for playing. Youzees are the next best for sure.
What the hell is that contraption that Big Brian uses, BLachance75? The one with the motor on the back strap and the tubes so it blows air in without all the BS noise? what the hell is Big Brian's screen name again?
Can’t help you with glasses but the Vio / Bunker Kings mask is meta when it comes to wet conditions. With a yellow lens it’s an advantage over anyone not using that setup.
I love my JT but rainy day wet conditions I’m using my Vio or BK mask. It might build some moisture way out on the edges of your peripheral if it super wet out. But the important part of the lens stay crispy clear with very little effort all the time.
What mask are you using currently? I have heard most glasses users like JT Proflexes. But last time i owned one of those, i didn't wear glasses... so i can't comment on fogging.
I use the CRBN Zero mask with homemade prescription inserts (aka, i took sidecuts, sandpaper, and a drill to a pair of glasses). CRBN has a set of foam replacements called RX Foam which have the mounting adapter for the their prescription insert. I 3D modeled my own glasses mount to attach to their prescription insert mounting point. A little CA glue, a screw, and viola. The model is not posted online, but it is available. They remove very easy for cleaning or storage. These pretty much imitate the Youzee inserts and practically eliminate fogging (of the glasses, nothing can save you from a cold rainy day).
As a glasses user, things i have found to work:
Youzee Inserts.
Mounted prescriptions like the CRBN ones.
Or a crap ton of air flow like the Ex Fog
I use a proflex and have a couple of small fans attached to the top, 20mm i think? It is pretty basic. I put some felt between the fans and the mask for vibration dampening, zip tied the fans in. The battery is an internally regulated 3.7v that i hot glued to my visor. I terminated the fan wires into a connector that matches the battery and just let it run all day.
I plan to build a housing to make it all one piece, add a switch, and possibly a circuit to boost voltage. The fans are 5 volt, and running on 3.7 they aren’t loud but aren’t as effective as i want. I will have to find a different battery or two much smaller ones to keep it small enough, but with a switch i can cut it off between rounds.
as it stands, the fans will run for about 12 hours if left on.
The best bet fitting your regular glasses is JT Flex. I have a size XXL head and big goofy Ray Bans and they fit although it’s always a PITA.
if you get Youzee lenses they will fit in almost anything. I’ve tested them in Flex and Dye i5. This is the solution I will use for the foreseeable future as there is no way I’m wearing contacts anywhere, especially paintballing.
Comment