Reg Rebuild kits for Guardian 13/3000 tanks?

[Meleager7]

Hi , would you guys know where to find Reg Rebuild kits for one of these?

https://www.badlandspaintball.com/gu...paintball-tank

Cheers, M7

[Toestr]

Badlands carries the piston for it, but is out of stock at the moment. I think guardian just uses a generic reg like the ones you see on eBay. Other companies that sell generic tanks (d3fy, crossair, low end HK) might have the same parts. Also maybe try Pure Energy, as their regs are the ones that the generics are usually based on.

If not, it might be worth upgrading to a Ninja, Immortal reg, etc reg.

Sent from my Pixel 4a using Tapatalk

[Meleager7]

I have a spare ninja reg pulled from a 68/4500 tank that failed hydro, but it needs a rebuild too....once rebuilt can that ninja reg go on a 3000 cylinder or does it need new burst valves, or new piston , or spring pack?

[BenoitOWN]

https://www.paintballgear.ca/tiberiu...it-920-01-2830

I have a myth reg on a expired 48/3000, don’t want to come off but pay ship and it yours.

[Meleager7]

Good to know, but I think I might try to re-use my ninja reg first , thanks for offer though!

[BenoitOWN]

I have a spare ninja reg pulled from a 68/4500 tank that failed hydro, but it needs a rebuild too....once rebuilt can that ninja reg go on a 3000 cylinder or does it need new burst valves, or new piston , or spring pack?

Burst disk only changing the 7.5k one to 5k I think.

[Jordan]

Burst disk only changing the 7.5k one to 5k I think.

This, plus it might be worth changing the fill gauge to a 3k version.

[Meleager7]

Good call on the gauge, much safer !