Mini midblock Orracle body RAW with ego feedneck

[Alexndl]

Picked up this body couple years ago from a member here and got other project waiting too so will most likely never finished it

any idea on the value?

I am sure this is from the lot of Orracle body from paintball gateway. Will need to be polished since you can still see some factory machining line.

Both side of the front are drilled and tap for gauge and/or air port. (You could run a female stab to the side and use normal pump kit for a more compact sniper)

Got it without feedneck so I had a local machinist (that have a lot of experience with paintball) to make a feedneck for Ego and had it milled for midblock.

[Alexndl]

At the same time

Any idea on pricing for this Bob long signature series
birdcage is RAW from a paintball machinist that did a run on customcocker some time ago

Frame not include (is currently at a machinist since prevous owner have cut with a hand saw the drop forward section of the frame... , we are trying to fix it but its a long shot so not included)

[BrickHaus]

It should be known Im no pricing expert, but Ipl give my .02.


The body. I guess Id start at 150 and see where it goes?


Thats a Great start to a cocker. Id rock the hell out of that shooter if complete, but I just cant see a bodykit being worth any more than 150 at its base.


The bob long. Its kinda weird you dont have that side tapped hole to adjust the hammer lug. I hqd a purple splash one that did. I kinda figured all signature series bodies had it.

But I sold a signature series pump to a friend. Black slider, ccm pump kit,and an aftermarket back block as the birdcage was missing. I asked 350 for that shooter and it was likely worth more. Only sold it to my friends dad because he wanted to get it for his son for graduating High school.

Id say the pile of parts you have is worth 380? Id list at 400 and see if ya get a bite.

thats just me, I see the cocker market now being flooded with guns to buy (thanks to all the recent manufacturers making modern cockers) and I perdict a trend of cocker prices coming back down myself.

[Cunha]

I'd probably put the signature series on ebay as they are obscure enough and cool enough that someone might be willing to pay way too much for it. Despite ebay fees.

It would be worth while to get the hacked frame back. If the drop forward cut is flat enough it could easily be filed all the way flat with hand tools let alone being corrected on a mill. I know I'd be fine with a signature frame with the drop removed.

[Alexndl]

Cunha here is a picture of the frame
it was cut higher than the drop so its not just "file it smooth" kind of work... we are adding a custom "rail" to fill the missing 1/2 inch...



wanted to keep it too since I have a second 96 BL raw slab body that was hacked and at the same machinist to fix it and to add some more cut