Mystery regulator stock?

[Mutantcatmoxie]

Found this wile going through some of my parts boxes anyone know any info? I don't think its worth much but let my know
IMG_3100.jpg

[Reflex0283]

I have zero idea what this is but I'd give you twenty bucks for it if nobody else knows what it is or wants to pay more for it

[Mutantcatmoxie]

Thanks for the offer but not looking to sell at the moment

[Chuck E Ducky]

Looks cool dose it take a 12g? What’s the other side look like?

I’m curious it’s purpose since it would go in an ASA. Looks like it’s ported on the side. So how would you put air to a marker unless it goes on something with two ASA. Or maybe a remote line. Is it a reg in the top half?

[Cunha]

Maybe was made for reproduced air power vector? The h8r? H8tr? I don't remember what those looked like so just guessing.

[Mutantcatmoxie]

Nope no 12g just a cut out to access the reg adjustment, The other side looks the same but with no 1/8 27 npt port and yes the reg is in the top half.

[Mutantcatmoxie]

Maybe was made for reproduced air power vector? The h8r? H8tr? I don't remember what those looked like so just guessing.

That would make sense It was in a box with alot of my Air power gear but not something Air power made so the H8ter would work.

I did have a preorder for A H8tr back in the day But never received it 😒

[Cunha]

Sweet. There ya go! There aren't a lot of options for regs in that configuration and its obviously not any of the usual suspects.

[Swedgin!!]

Well whatever it may be that’s a cool piece.

[Trbo323]

You're sure it's a regulator and not just a gas through?

Plug a remote into that side port and then screw it into an ASA you can run it as a stock on just about anything without having to buy a separate stock for each marker

Sent from my motorola edge 2024 using Tapatalk

[Mutantcatmoxie]

It looks like it was made to be a regulator but I have on idea if it works like a regulator should, don't have any air at the moment to test. It has an adjustment screw in the back?

Ill see if can pull it apart and get some more pics.

[Trbo323]

Those look like clock set screws to me.

Screw it into a ASA and the one closest to the ASA sets the clock position for the input port, the next one back sets the clock position for the cutout on the side (what's in there?) and the last one sets the stock length and clock position for the shoulder rest

That would be my guess looking at it anyway. The problem I see is any marker that needs a regulator is going to have one onboard, any marker that doesn't isn't going to get a large benefit from running one between the tank and asa. If this does have a regulator inside it's a very odd product and I'm not really sure who the target audience would be

Sent from my motorola edge 2024 using Tapatalk