I was hoping to get some feedback on the value of my gear. I don't really play anymore, and I've hoarded a bunch of guns. I might keep a couple; likely the Rev-I, G3, and DRV, but the rest can go.
Any help on prices would be appreciated. I'm in Canada, but I'm also not opposed to shipping across borders for the right price.
Here's what I've got:
Tribal Fluster - Basically mint, save for a scratch I made on the lpr threaded cap. C-clip is broken inside the stock HPR so I haven't been able to service it, but the marker works fine with a different reg.
ULE Mag - In good condition.
.68 Automag - Just needs a couple of new seals around the valve pin. Also comes with a stubby brass barrel.
Hammer 7 - Good condition, comes with 5 straight mags.
DP G3 - Works, fully upgraded with rear gauge, Tech-T bolt, has a MacDev hpr, NDZ on/off, and comes with two different aftermarket boards, I believe a Virtue and APE.
Tippmann A-5 - E-gripped, has a rifled barrel.
BT Omega - Just needs a detent.
GoG Enmey - Needs a trigger valve seal
BT TM -16 - Unknown condition, I haven't dissasembled it. Has a working rip clip.
Dukie DRV - Good working order. Comes with 14" J&J Ceramic barrel, both a long and short under barrel feed tube, and four cylinders.
Rev- I - Has a couple of deep scratches on the body, and the OLED screen is dead. Otherwise in working order.
Tippmann Crossover - Eyes don't work, needs detents. Otherwise in working order. Has a 10" Hammerhead barrel on it.
Spyder E99 Avant - Mint. It was used once, then put in storage for twenty years.
Also not pictured:
Shocker Sport Turbo - Looks nearly mint, although I haven't tested it yet.
Tippmann Tipx - Comes with remote line and adapter, 3 Tru-Feed mags and two 7 round mags, and a hammerhead barrel.
Gameface Skul - Black, good condition.
OG Dye I3 - Mint, save for a scratch on the lense.
JT Flex 8 - Black, it was a Headshield until I drilled out the rivets and removed the helmet portion. Otherwise in very good condition.
Spyder with a Rocking Trigger.
Any help on prices would be appreciated. I'm in Canada, but I'm also not opposed to shipping across borders for the right price.
Here's what I've got:
Tribal Fluster - Basically mint, save for a scratch I made on the lpr threaded cap. C-clip is broken inside the stock HPR so I haven't been able to service it, but the marker works fine with a different reg.
ULE Mag - In good condition.
.68 Automag - Just needs a couple of new seals around the valve pin. Also comes with a stubby brass barrel.
Hammer 7 - Good condition, comes with 5 straight mags.
DP G3 - Works, fully upgraded with rear gauge, Tech-T bolt, has a MacDev hpr, NDZ on/off, and comes with two different aftermarket boards, I believe a Virtue and APE.
Tippmann A-5 - E-gripped, has a rifled barrel.
BT Omega - Just needs a detent.
GoG Enmey - Needs a trigger valve seal
BT TM -16 - Unknown condition, I haven't dissasembled it. Has a working rip clip.
Dukie DRV - Good working order. Comes with 14" J&J Ceramic barrel, both a long and short under barrel feed tube, and four cylinders.
Rev- I - Has a couple of deep scratches on the body, and the OLED screen is dead. Otherwise in working order.
Tippmann Crossover - Eyes don't work, needs detents. Otherwise in working order. Has a 10" Hammerhead barrel on it.
Spyder E99 Avant - Mint. It was used once, then put in storage for twenty years.
Also not pictured:
Shocker Sport Turbo - Looks nearly mint, although I haven't tested it yet.
Tippmann Tipx - Comes with remote line and adapter, 3 Tru-Feed mags and two 7 round mags, and a hammerhead barrel.
Gameface Skul - Black, good condition.
OG Dye I3 - Mint, save for a scratch on the lense.
JT Flex 8 - Black, it was a Headshield until I drilled out the rivets and removed the helmet portion. Otherwise in very good condition.
Spyder with a Rocking Trigger.
Attached Files
Comment