Current Total: 72
Lifetime Total: 93
The Armory
The collection is split between my dad’s house on the East Coast and me on the West but only he has room for the big fancy display wall. This isn’t everything, but it’s most of the really cool stuff.
The Twisters:
Weapon 1 TWSTR LV1
#118 - Custom Ano by Arc Anodizing
Red acid wash, with a blue acid wash inside the shield. My dad is a huge Marvel fan so all of his Twisters are superhero themed, this one is Captain America.
Unfortunately, due to the complexity of the ano, it's lost most of the blue in the shield. We knew it might happen when we went into it, but it still looks awesome just the same.
TWSTR SLR LV1.6
#4 - Winter Soldier
Ano by Caustic Customs
When I heard they were doing a new LV, I knew I had to get a companion for my dad's Captain America LV. Especially since we were worried about the fading ano and the eventual noid failure. So meet the Winter Soldier. It's hard to see but there's a subtle marble effect to the silver to really sell the ano.
Banzai Splash TWSTER LV1
#139, Heritage Series - Factory Banzai Splash by Arnold's
I really lucked into this one. My dad bought his first and I really loved it. Needed a new marker for tournaments so I asked T2 if he had any in black and green left (team colors). He then sends me a shot of these Heritage guns. 8 guns each done in a unique throwback Eclipse pattern along with a few extra goodies besides the normal Twister LV1. I bought this the day before they were officially announced and the rest sold out within 24 hours.
They even did these awesome throwback jewels for the Heritage guns that call back to the original Eclipse logo on their early Cockers and Mags. Fits over the milled TWSTR logo. The splash screen of each of them is unique and calls back to old Eblade or Ego splash screens as well.
TWSTR F5 Autococker
#4 - Weapon X - Ano by Arc Anodizing
Continuing the superhero trend, this one is Wolverine themed, with the X-men logo engraved in the grips. The panels were from Luke-AO and the “X” was milled by Tymcneer. We also had a full set of Ressi pneumatics match-annoed.
TWSTR F5 Autococker
#54 - Lucy - Ano by Arc Anodizing
Ano inspired by a classic Twister in this color with chrome parts. I swapped them for gloss silver so I didn't have to deal with pitting.
Inception Design TWSTR
#4 - Hulk - Aesthetic Anodizing
The latest in the Twister line-up. Shoots as good as any of the other Inception guns but just doesn’t feel as special as the other Twister's. I love that ID was able to bring the milling over the barrel hood though. Need to take a photos but the trigger shoe says "SMASH" one it haha.
Gotta love the small details haha
Boston Paintball Ultra-Micro Mini Twister
Thanos - Ano by Caustic Customs
The lightest twister autococker design ever made. It is one of 12 ever made by LAPCO, discontinued over fears that it wasn't structurally sound enough. It's an original 90's mini body with a modified Twister 45 mill, with nothing connecting the two tubes until just above the valve. A typical Twister has the tubes attached at the front where the block mounts.
This body has been further lightened by Mozak Machine. It has convertible milling (no sight rail), the feedneck has been machined for an Eclipse feedneck, and the backblock has hidden pocket milling inside to lighten it up. The body didn't have a matching twister front block so instead to save weight it uses a 2K-style Inception front block with a custom made 2k to 99 spec banjo adapter made by Angry Antle.
Topped off with a matching TWSTR tank and Powerhouse reg.
Annihilation TWSTR
Well... - Unicorn
Ano by Aesthetic Anodizing
An Inception Twister with cf00s's Annihilation kit on it. It's basically a modernized Reflex kit which is an autococker response trigger.
Inception Design TWSTR Pump
#84 - Ano by Aesthetic Anodizing
Had an opportunity to pick up a couple of these Inception bodies. Pieced this one together from a super cheap hornet. Still needs tuning, or maybe I just don't like the ID pump kit.
TWSTR Emek
A 3d-printed TWSTR body coupled with the hAIR valve and a double trigger. Absolutely ridiculous to play with, need to dial the trigger in a bit better so it REALLY rips.
Inception TWSTR Emek3M
A 3d-printed TWSTR body coupled with the hAIR valve and a double trigger. Absolutely ridiculous to play with, need to dial the trigger in a bit better so it REALLY rips.
The Cockers:
CCM 04 J2
Factory Anodizing + some color matching by Caustic
An almost entirely original J2. Previous owner had compiled all the parts but they didn't all match. Caustic knocked it out of the park matching all the bits to the body color. It's missing the proper J2 beavertail, which a member gifted to me a few years ago (Thank you!!), just needs to be match ano'd, and the ram is the later wavy ram because the original wouldn't seal.
Killshot Customs Kraken
#49
Ano by Aesthetic Anodizing
Love the look of these bodies.
Lockout FreeFlow Fulcrum
Ano by Arc Anodizing
Lockout-owned Freeflow Fulcrum, all original minus the newer Shocktech frame and ASA. Wanted to do an ano that called back too the OG Lockout red/black guns that wasn’t just two-tone and Arc killed it with the urban camo.
Nummech Pyro Cocker
Ano by Caustic Customs
This is flat out the most gorgeous ano job I've ever seen. It's so polished it looks like liquid. It's insanely light as well. Only thing I wish I'd done differently is go with a slider, I don't really like the Nummech hinge.
KAPP Flame
Nickel-Plated
Scored this absolute steal off of Craigslist. Looks like it came out of the factory yesterday, no pitting anywhere. Runs like a sewing machine too. Have a KAPP feedneck I need to install still.
FreeFlow Reflex
Well...
Ano by Arc Anodizing
Freeflow's take on the classic Dye Reflex. The frame is insanely comfortable, just needs a bit of a tune-up to get the pull to more where I like it.
Custom Inception Fighter Midblock
"Tiger in the Grass" - Ano by Aesthetic Anodizing
Built this intending it to be a super tight mech/woodsball gun. Feels amazing in the hand and looks gorgeous.
Shocktech SFL Rental Gun
Bad photo of it, but it's a new-style Shocktech SFL but instead of the "SHOCKTECH" engraving it says "RENTAL GUN" and in an appropriate color as well haha.
Shocktech Gen 3 SFL
Almost entirely original, even has the matching PL reg and bottomline. Feedneck is the only thing not stock, but it matches the anno perfectly and is much better than the original
Jackal RDL
Ano by ATMF
The cursed gun. It had a bad trip to the anodizers and tolerances are fairly screwed up. It's been to multiple techs, never got it above 250 FPS. A shame too as it has one of the best triggers of any autococker I've ever shot.
FreeFlow Rhythm
Factory Anodizing
My teammate hasn't played for years and my dad and I haven been bugging him to sell this forever. Finally broke down last year. Was pretty much an all original freeflow but the parts were pretty shot from sitting around so long. All Inception parts right now, but in the process of switching it around.
05 Orange Prostock
Not really rare but I LOVE this color. Palmer's pneu's with an Eclipse frame and AKA reg. Shoots like a dream and just keeps on running
The Pumps:
Niche Element
Factory ano, inspired by a Dye colorway, not the Dolphins haha.
It looks great but the gun has really just never worked right. New issues every time I've brought it out to play. It's consigned to the tech bench till it can all be sorted out.
Woodland Camo CCM S6
Factory Anodizing by AnoMaxx
CCM did 6 or 7 guns in this pattern and it is hands down the best camo ano I've seen on any gun ever. This is one of 2 or 3 S6's that were done.
Mozak Machine Black Diamond Prototype
The prototype design for our team gun. We went a little more extreme in the final version below
Mozak Machine Black Diamond Team Mill
A custom milled Mozak design for our team Black Diamond. Features a hidden internal ball detent, our team logo, and unique diamond milling. We milled 11 total, #2 is mine built as a pump and we built my dad's #1 as a mech (no pics of that one).
CCM S6
Have owned this since new from way back in the day of CCM. One of the smoothest fastest pumps you'll ever shoot.
Meteor V1 Featherlite
Factory Anodizing
The trigger frame on this is amazing. Super tight tolerances and with an AKA plate and roller bearing set screws, the trigger pull is butter.
Belsales Pre-2k Evo
A parts build, this thing has claimed MANY surrenders by the previous owner so happy to carry on the tradition.
ANS GX-3
Bought the gun as NOS, never assembled, no internals. Fortunately ANS still sells pretty much everything for these. Pretty, but my other cockers are lighter/better trigger job/etc so made this into a loaner pump for now.
Angry Antle Custom
Ano TBD
My as yet unfinished Angry Antle Custom. Antle rounded the top for the CCI feed, gave it decorative cuts to match the frame and pump kit, and fitted a custom P-block that uses a quad-rod CCM pump kit for a crazy smooth stroke. Going to be a monster when finished, but still needs some finishing touches before it goes to ano.
Kamikaze Shooters/Carter DD68 Duck
Dave Loo and Earon Carter originally developed these amazing pieces together. The first ten were built for the Kamikaze Shooters, but only 8 were actually assembled before Dave's death. This is one of the last two, milled differently (hence why the team stamp is only half there. I've drooled over duck's since I started playing and I couldn't pass up the opportunity to own a piece of pb history like this!
Carter Machine Gecko Blaster
Ano by Blizzard Anodizing
Probably on of the rarest paintball guns out there. Carter made 3 back in the day, one of which was lost to a fire. This one comes from a second run of them he did in the late 00's.
Carterized CIP Boxgun
Awesome little shooter.
Long Barreled PGP
Two-tone polish and matte finish
Heavily modified PGP2K built by TyMcneer. Rebarreled in thick walled .678 with dual spiral porting and a new bolt to match. Sidetube, Spring-fed, Brass K-Frame, PPS DynaValve with some additional valve work by Stuffy. Holds about 12 shots, weighs a ton, and is dead silent. There’s some debate as to whether I can still call this a PGP haha.
Avratech Retro7
Ano by Arc Anodizing
A modernized Nelspot 007. A great design marred by issues with the company and owner.
Racegun Nelspot 007
Heavily modified by Chaos originally. Mostly CCI internals, a cut down BOA barrel with detent and wedgits, and a PVC feed gate.
KPCS Nelspot 007
KPCS -designed stainless steel body, based off 007 dimensions. Had Mozak add the ASP detent mod as well. Still a work in progress, will be adding one of Doc's valve bodies to run the ICD lever changer inline
Nelspot 007
Fun little shooter, all Lapco internals so it shoots really nice despite it’s look. Great gun to let people try out pump, plus can’t beat the price, traded a barrel back for it haha. Currently has a 12 gram changer from my phantom, but I’m thinking about trying to pick up a Micro-CA for it.
Sterling STP
The self-proclaimed Rolls Royce of paintball guns. Picked this up along with a lot of other MCBer's from a shop in Australia blowing out their remaining stock. Never seen one in person before and blown away how smooth the pump stroke is on these.
Palmer's Painter - #425
Lever-action, quicksilver changer and offset feed. And yes it's awesome
Line SI Bushmaster
Previous owner cut down the feedneck unfortunately, so in search of a better feeding solution than what is currently attached.
DSG
Guaranteed to make you miss every game the first day you bring it to the field. The pump stroke on this gun is fantastic, one of the smoothest of any gun I own. The Stella really completes the look too.
CCM SSR
CCM's dedicated first strike sniper rifle. 6 round magazine, and the mags are some of the best designed out there IMO. All Magpul MOE hardware with a Vortex red dot.
Splatmaster
This has one of Kit's kits . All new internals that make it WAY easier to use. Fun little thing to plink with. Running a Palmer's 90 degree ASA adapter with the ICD lever changer for a Hawaiian style setup.
JT ER-2
A fine use of my stimulus check haha. Thanks to the mad scientists on MCB it now is a stock class pump with a freak-insert for a barrel.
The Mechs:
Angry Antle Infidel Shocker
#ANGRY-08 - Ano by F/X Anodizing
A limited-run factory approved Shocker from Angry Antle. The craftsmanship is awesome, you would never guess it wasn’t done at the factory. Even has a unique factory serial (ANGRY-08).
Palmer’s Blazer
Factory Anodizing
If you've never shot a Blazer and like mechs you must check one out. Stupid fast and just super tiny.
Palmer's Nasty Typhoon #226
Tigerstripe finish, 14 inch .685 barrels. I've since found a black CP gas-through, need to take some new pics
UMF Karta Mag
Always wanted a Karta, just happened to time it right and picked up all the pieces in a week. The Logic frame is amazing, wish he still made these. Tuna built it for me so it sings.
SpecOps Longbow
I couldn't pass up the chance to own this. SpecOps most iconic design in their signature Digicamo duracoat. I suspect this may have been the factory prototype as the feed is longer than a standard longbow mag.
AGD Tac-1
Pretty standard Tac-1. This started life as a SpecOps Q-Bow. Sadly we sold off most of the kit, I just have the longbow mags and magwell (not on the gun atm) along with the q-pod mount on the front.
Planet Eclipse GMek
I love how this feels to shoulder but I wish the trigger was better on it.
Tippmann SMG-60
Stripped of paint by the previous owner and fitted with the machine gun style shroud. Don't have a CO2 tank to test this right now, but it needs some work anyways.
Tippmann SMG-68
This thing is in immaculate condition. The plan is to strip the SMG-60 for the F/A sear or have a friend make a copy it for this one. Just need more clips for it.
Crosman 3357
Picked up 4 of these from an estate sale originally, sold the other three and kept this one.
The Electro’s:
ECA A4 Fly
A heavily modified A4 Fly from ECA. Gorgeous and a lot of fun to play with. For the love of God don't give ECA your money or markers though.
Hurricanes Ego 10
Factory Anodizing - 1 of 6.
The 'Canes switched from Eclipse to Dye this year so the gun was never went into full production status, just the handful were made for the team. It's absolutely gorgeous and shoots like a dream.
Planet Eclipse DC2
1 of 150
1 of 22 in this color
Finally tracked down a matching ASA for this! Still trying to find an extra matching back so I can freak bore it. The stock one is way too big for modern paint sadly.
Dye DLS
I remember seeing the Paragon in person at PBE the year it was announced and it's been one of the most wanted guns ever since. Was so hyped when this project was announced but it just really hasn't lived up to the promise.
FreeFlow Trix
Love the milling on this, though I kinda wish I'd gone with a different ano in the end.
Russian Legion Shocker
These are IMO one of the best PL guns ever made. All the attention to detail with the milling carries over to all the other parts like the wire trigger guard and feedneck lever.
Shocker SFT
A Shocker built almost entirely of non-Smart Parts parts. Body is an original SFT milled down to Nummech's tube design. Filled with all the best aftermarket parts, the only stockish piece left is the body. Shoots way better than you would expect.
Some cool past guns:
TWSTR CS1
#4 - Parker
Factory ano, planned to make this a more obvious Spiderman-tribute with some lasered webs. Gorgeous gun but I just preferred the way the LV1 shot.
Lufkon's Evil M
Built by him as his personal gun, with his milling and a one off frame and VA. Uses an 06 Ego board Evil M's are basically the next-gen Viking that was never released, because of SP's lawsuit against AKA.
Eclipse Autococker
Ano by FX Anodizing
I told Mario I wanted a British Racing green, and he NAILED the color. Gorgeous in person. Would love to buy this back, as I had to sell it for rent at one point but the current owner won’t part with it :/.
FreeFlow Clutch
#40
Love the color and design of this, but a teammate really wanted one and missed out on the sale, so I sold it to him.
Carter Buzzard
One of the last guns Carter built. Has an extra long rifle length pump handle and a vert feed in addition to the SC tube.
Palmer's Stroker #1954
Converted from a PGP so it's really tiny. Got this in a bag of pieces that went back to Palmer's to be rebuilt, but the barrel was damaged so they had to slice a bit off the front. Had them add the muzzle break because I was convinced I'd shoot my fingers off otherwise.
Lifetime Total: 93
The Armory
The collection is split between my dad’s house on the East Coast and me on the West but only he has room for the big fancy display wall. This isn’t everything, but it’s most of the really cool stuff.
The Twisters:
Weapon 1 TWSTR LV1
#118 - Custom Ano by Arc Anodizing
Red acid wash, with a blue acid wash inside the shield. My dad is a huge Marvel fan so all of his Twisters are superhero themed, this one is Captain America.
Unfortunately, due to the complexity of the ano, it's lost most of the blue in the shield. We knew it might happen when we went into it, but it still looks awesome just the same.
TWSTR SLR LV1.6
#4 - Winter Soldier
Ano by Caustic Customs
When I heard they were doing a new LV, I knew I had to get a companion for my dad's Captain America LV. Especially since we were worried about the fading ano and the eventual noid failure. So meet the Winter Soldier. It's hard to see but there's a subtle marble effect to the silver to really sell the ano.
Banzai Splash TWSTER LV1
#139, Heritage Series - Factory Banzai Splash by Arnold's
I really lucked into this one. My dad bought his first and I really loved it. Needed a new marker for tournaments so I asked T2 if he had any in black and green left (team colors). He then sends me a shot of these Heritage guns. 8 guns each done in a unique throwback Eclipse pattern along with a few extra goodies besides the normal Twister LV1. I bought this the day before they were officially announced and the rest sold out within 24 hours.
They even did these awesome throwback jewels for the Heritage guns that call back to the original Eclipse logo on their early Cockers and Mags. Fits over the milled TWSTR logo. The splash screen of each of them is unique and calls back to old Eblade or Ego splash screens as well.
TWSTR F5 Autococker
#4 - Weapon X - Ano by Arc Anodizing
Continuing the superhero trend, this one is Wolverine themed, with the X-men logo engraved in the grips. The panels were from Luke-AO and the “X” was milled by Tymcneer. We also had a full set of Ressi pneumatics match-annoed.
TWSTR F5 Autococker
#54 - Lucy - Ano by Arc Anodizing
Ano inspired by a classic Twister in this color with chrome parts. I swapped them for gloss silver so I didn't have to deal with pitting.
Inception Design TWSTR
#4 - Hulk - Aesthetic Anodizing
The latest in the Twister line-up. Shoots as good as any of the other Inception guns but just doesn’t feel as special as the other Twister's. I love that ID was able to bring the milling over the barrel hood though. Need to take a photos but the trigger shoe says "SMASH" one it haha.
Gotta love the small details haha
Boston Paintball Ultra-Micro Mini Twister
Thanos - Ano by Caustic Customs
The lightest twister autococker design ever made. It is one of 12 ever made by LAPCO, discontinued over fears that it wasn't structurally sound enough. It's an original 90's mini body with a modified Twister 45 mill, with nothing connecting the two tubes until just above the valve. A typical Twister has the tubes attached at the front where the block mounts.
This body has been further lightened by Mozak Machine. It has convertible milling (no sight rail), the feedneck has been machined for an Eclipse feedneck, and the backblock has hidden pocket milling inside to lighten it up. The body didn't have a matching twister front block so instead to save weight it uses a 2K-style Inception front block with a custom made 2k to 99 spec banjo adapter made by Angry Antle.
Topped off with a matching TWSTR tank and Powerhouse reg.
Annihilation TWSTR
Well... - Unicorn
Ano by Aesthetic Anodizing
An Inception Twister with cf00s's Annihilation kit on it. It's basically a modernized Reflex kit which is an autococker response trigger.
Inception Design TWSTR Pump
#84 - Ano by Aesthetic Anodizing
Had an opportunity to pick up a couple of these Inception bodies. Pieced this one together from a super cheap hornet. Still needs tuning, or maybe I just don't like the ID pump kit.
TWSTR Emek
A 3d-printed TWSTR body coupled with the hAIR valve and a double trigger. Absolutely ridiculous to play with, need to dial the trigger in a bit better so it REALLY rips.
Inception TWSTR Emek3M
A 3d-printed TWSTR body coupled with the hAIR valve and a double trigger. Absolutely ridiculous to play with, need to dial the trigger in a bit better so it REALLY rips.
The Cockers:
CCM 04 J2
Factory Anodizing + some color matching by Caustic
An almost entirely original J2. Previous owner had compiled all the parts but they didn't all match. Caustic knocked it out of the park matching all the bits to the body color. It's missing the proper J2 beavertail, which a member gifted to me a few years ago (Thank you!!), just needs to be match ano'd, and the ram is the later wavy ram because the original wouldn't seal.
Killshot Customs Kraken
#49
Ano by Aesthetic Anodizing
Love the look of these bodies.
Lockout FreeFlow Fulcrum
Ano by Arc Anodizing
Lockout-owned Freeflow Fulcrum, all original minus the newer Shocktech frame and ASA. Wanted to do an ano that called back too the OG Lockout red/black guns that wasn’t just two-tone and Arc killed it with the urban camo.
Nummech Pyro Cocker
Ano by Caustic Customs
This is flat out the most gorgeous ano job I've ever seen. It's so polished it looks like liquid. It's insanely light as well. Only thing I wish I'd done differently is go with a slider, I don't really like the Nummech hinge.
KAPP Flame
Nickel-Plated
Scored this absolute steal off of Craigslist. Looks like it came out of the factory yesterday, no pitting anywhere. Runs like a sewing machine too. Have a KAPP feedneck I need to install still.
FreeFlow Reflex
Well...
Ano by Arc Anodizing
Freeflow's take on the classic Dye Reflex. The frame is insanely comfortable, just needs a bit of a tune-up to get the pull to more where I like it.
Custom Inception Fighter Midblock
"Tiger in the Grass" - Ano by Aesthetic Anodizing
Built this intending it to be a super tight mech/woodsball gun. Feels amazing in the hand and looks gorgeous.
Shocktech SFL Rental Gun
Bad photo of it, but it's a new-style Shocktech SFL but instead of the "SHOCKTECH" engraving it says "RENTAL GUN" and in an appropriate color as well haha.
Shocktech Gen 3 SFL
Almost entirely original, even has the matching PL reg and bottomline. Feedneck is the only thing not stock, but it matches the anno perfectly and is much better than the original
Jackal RDL
Ano by ATMF
The cursed gun. It had a bad trip to the anodizers and tolerances are fairly screwed up. It's been to multiple techs, never got it above 250 FPS. A shame too as it has one of the best triggers of any autococker I've ever shot.
FreeFlow Rhythm
Factory Anodizing
My teammate hasn't played for years and my dad and I haven been bugging him to sell this forever. Finally broke down last year. Was pretty much an all original freeflow but the parts were pretty shot from sitting around so long. All Inception parts right now, but in the process of switching it around.
05 Orange Prostock
Not really rare but I LOVE this color. Palmer's pneu's with an Eclipse frame and AKA reg. Shoots like a dream and just keeps on running
The Pumps:
Niche Element
Factory ano, inspired by a Dye colorway, not the Dolphins haha.
It looks great but the gun has really just never worked right. New issues every time I've brought it out to play. It's consigned to the tech bench till it can all be sorted out.
Woodland Camo CCM S6
Factory Anodizing by AnoMaxx
CCM did 6 or 7 guns in this pattern and it is hands down the best camo ano I've seen on any gun ever. This is one of 2 or 3 S6's that were done.
Mozak Machine Black Diamond Prototype
The prototype design for our team gun. We went a little more extreme in the final version below
Mozak Machine Black Diamond Team Mill
A custom milled Mozak design for our team Black Diamond. Features a hidden internal ball detent, our team logo, and unique diamond milling. We milled 11 total, #2 is mine built as a pump and we built my dad's #1 as a mech (no pics of that one).
CCM S6
Have owned this since new from way back in the day of CCM. One of the smoothest fastest pumps you'll ever shoot.
Meteor V1 Featherlite
Factory Anodizing
The trigger frame on this is amazing. Super tight tolerances and with an AKA plate and roller bearing set screws, the trigger pull is butter.
Belsales Pre-2k Evo
A parts build, this thing has claimed MANY surrenders by the previous owner so happy to carry on the tradition.
ANS GX-3
Bought the gun as NOS, never assembled, no internals. Fortunately ANS still sells pretty much everything for these. Pretty, but my other cockers are lighter/better trigger job/etc so made this into a loaner pump for now.
Angry Antle Custom
Ano TBD
My as yet unfinished Angry Antle Custom. Antle rounded the top for the CCI feed, gave it decorative cuts to match the frame and pump kit, and fitted a custom P-block that uses a quad-rod CCM pump kit for a crazy smooth stroke. Going to be a monster when finished, but still needs some finishing touches before it goes to ano.
Kamikaze Shooters/Carter DD68 Duck
Dave Loo and Earon Carter originally developed these amazing pieces together. The first ten were built for the Kamikaze Shooters, but only 8 were actually assembled before Dave's death. This is one of the last two, milled differently (hence why the team stamp is only half there. I've drooled over duck's since I started playing and I couldn't pass up the opportunity to own a piece of pb history like this!
Carter Machine Gecko Blaster
Ano by Blizzard Anodizing
Probably on of the rarest paintball guns out there. Carter made 3 back in the day, one of which was lost to a fire. This one comes from a second run of them he did in the late 00's.
Carterized CIP Boxgun
Awesome little shooter.
Long Barreled PGP
Two-tone polish and matte finish
Heavily modified PGP2K built by TyMcneer. Rebarreled in thick walled .678 with dual spiral porting and a new bolt to match. Sidetube, Spring-fed, Brass K-Frame, PPS DynaValve with some additional valve work by Stuffy. Holds about 12 shots, weighs a ton, and is dead silent. There’s some debate as to whether I can still call this a PGP haha.
Avratech Retro7
Ano by Arc Anodizing
A modernized Nelspot 007. A great design marred by issues with the company and owner.
Racegun Nelspot 007
Heavily modified by Chaos originally. Mostly CCI internals, a cut down BOA barrel with detent and wedgits, and a PVC feed gate.
KPCS Nelspot 007
KPCS -designed stainless steel body, based off 007 dimensions. Had Mozak add the ASP detent mod as well. Still a work in progress, will be adding one of Doc's valve bodies to run the ICD lever changer inline
Nelspot 007
Fun little shooter, all Lapco internals so it shoots really nice despite it’s look. Great gun to let people try out pump, plus can’t beat the price, traded a barrel back for it haha. Currently has a 12 gram changer from my phantom, but I’m thinking about trying to pick up a Micro-CA for it.
Sterling STP
The self-proclaimed Rolls Royce of paintball guns. Picked this up along with a lot of other MCBer's from a shop in Australia blowing out their remaining stock. Never seen one in person before and blown away how smooth the pump stroke is on these.
Palmer's Painter - #425
Lever-action, quicksilver changer and offset feed. And yes it's awesome
Line SI Bushmaster
Previous owner cut down the feedneck unfortunately, so in search of a better feeding solution than what is currently attached.
DSG
Guaranteed to make you miss every game the first day you bring it to the field. The pump stroke on this gun is fantastic, one of the smoothest of any gun I own. The Stella really completes the look too.
CCM SSR
CCM's dedicated first strike sniper rifle. 6 round magazine, and the mags are some of the best designed out there IMO. All Magpul MOE hardware with a Vortex red dot.
Splatmaster
This has one of Kit's kits . All new internals that make it WAY easier to use. Fun little thing to plink with. Running a Palmer's 90 degree ASA adapter with the ICD lever changer for a Hawaiian style setup.
JT ER-2
A fine use of my stimulus check haha. Thanks to the mad scientists on MCB it now is a stock class pump with a freak-insert for a barrel.
The Mechs:
Angry Antle Infidel Shocker
#ANGRY-08 - Ano by F/X Anodizing
A limited-run factory approved Shocker from Angry Antle. The craftsmanship is awesome, you would never guess it wasn’t done at the factory. Even has a unique factory serial (ANGRY-08).
Palmer’s Blazer
Factory Anodizing
If you've never shot a Blazer and like mechs you must check one out. Stupid fast and just super tiny.
Palmer's Nasty Typhoon #226
Tigerstripe finish, 14 inch .685 barrels. I've since found a black CP gas-through, need to take some new pics
UMF Karta Mag
Always wanted a Karta, just happened to time it right and picked up all the pieces in a week. The Logic frame is amazing, wish he still made these. Tuna built it for me so it sings.
SpecOps Longbow
I couldn't pass up the chance to own this. SpecOps most iconic design in their signature Digicamo duracoat. I suspect this may have been the factory prototype as the feed is longer than a standard longbow mag.
AGD Tac-1
Pretty standard Tac-1. This started life as a SpecOps Q-Bow. Sadly we sold off most of the kit, I just have the longbow mags and magwell (not on the gun atm) along with the q-pod mount on the front.
Planet Eclipse GMek
I love how this feels to shoulder but I wish the trigger was better on it.
Tippmann SMG-60
Stripped of paint by the previous owner and fitted with the machine gun style shroud. Don't have a CO2 tank to test this right now, but it needs some work anyways.
Tippmann SMG-68
This thing is in immaculate condition. The plan is to strip the SMG-60 for the F/A sear or have a friend make a copy it for this one. Just need more clips for it.
Crosman 3357
Picked up 4 of these from an estate sale originally, sold the other three and kept this one.
The Electro’s:
ECA A4 Fly
A heavily modified A4 Fly from ECA. Gorgeous and a lot of fun to play with. For the love of God don't give ECA your money or markers though.
Hurricanes Ego 10
Factory Anodizing - 1 of 6.
The 'Canes switched from Eclipse to Dye this year so the gun was never went into full production status, just the handful were made for the team. It's absolutely gorgeous and shoots like a dream.
Planet Eclipse DC2
1 of 150
1 of 22 in this color
Finally tracked down a matching ASA for this! Still trying to find an extra matching back so I can freak bore it. The stock one is way too big for modern paint sadly.
Dye DLS
I remember seeing the Paragon in person at PBE the year it was announced and it's been one of the most wanted guns ever since. Was so hyped when this project was announced but it just really hasn't lived up to the promise.
FreeFlow Trix
Love the milling on this, though I kinda wish I'd gone with a different ano in the end.
Russian Legion Shocker
These are IMO one of the best PL guns ever made. All the attention to detail with the milling carries over to all the other parts like the wire trigger guard and feedneck lever.
Shocker SFT
A Shocker built almost entirely of non-Smart Parts parts. Body is an original SFT milled down to Nummech's tube design. Filled with all the best aftermarket parts, the only stockish piece left is the body. Shoots way better than you would expect.
Some cool past guns:
TWSTR CS1
#4 - Parker
Factory ano, planned to make this a more obvious Spiderman-tribute with some lasered webs. Gorgeous gun but I just preferred the way the LV1 shot.
Lufkon's Evil M
Built by him as his personal gun, with his milling and a one off frame and VA. Uses an 06 Ego board Evil M's are basically the next-gen Viking that was never released, because of SP's lawsuit against AKA.
Eclipse Autococker
Ano by FX Anodizing
I told Mario I wanted a British Racing green, and he NAILED the color. Gorgeous in person. Would love to buy this back, as I had to sell it for rent at one point but the current owner won’t part with it :/.
FreeFlow Clutch
#40
Love the color and design of this, but a teammate really wanted one and missed out on the sale, so I sold it to him.
Carter Buzzard
One of the last guns Carter built. Has an extra long rifle length pump handle and a vert feed in addition to the SC tube.
Palmer's Stroker #1954
Converted from a PGP so it's really tiny. Got this in a bag of pieces that went back to Palmer's to be rebuilt, but the barrel was damaged so they had to slice a bit off the front. Had them add the muzzle break because I was convinced I'd shoot my fingers off otherwise.
Comment