Welcome to MCB! We are the most popular and active paintball forum found on the internet! Thank you for stopping by.
If this is your first visit, be sure to
check out the FAQ by clicking the
link above. You may have to register
before you can post: click the register link above to proceed. To start viewing messages,
select the forum that you want to visit from the selection below.
How much modification did it take to get that bob long frame on the hammer? I have a trracer and a bob long frame sitting around that would be sweet bolted together.
How much modification did it take to get that bob long frame on the hammer? I have a trracer and a bob long frame sitting around that would be sweet bolted together.
As-is they don't want to mate up properly with a Hammer body because the bolt spacing is just a little off, so you can either drill an extra hole in the frame or grind down the valvebody (which has a wider diameter than the rest of the body) and put an extra hole in it. The former worked better than the latter for me.
For some reason the gun as assembled is breaking paint on me so it's definitely a work in progress.
Comment