Here’s my current arsenal of paintball markers, I have zero intention of adding more to the mix, but you know how it goes on MCB….
please excuse the dog hair, I did what i could to get it gone but my super helpful pup kept finding ways to put it all back.
more individual marker pics below this post.
CCM T2, Gen 1 in dust clear, (almost looks white in person). Typically shoot this with parabolic barrels and/or a freak barrel. Only things “missing” are the original matching CCM fittings and asa, but I’ve got a dust black CCM asa and CCM semi-gloss black fittings, so it works out nicely still.
CCI Phantom(#1) VSC in black with CCM air fittings, ASP detent modded body, blue roller bearing trigger (from rockerpb, I think?), gauged valve body, black hardline kit, CCM 86 frame, purple CCI trigger shoe, dual undercocking kit, clear feed block and carbon fiber feed tube & ghost ring, both of which I made. I usually shoot this with some kind of freak barrel, just depends on my mood.
“Not a T2” custom anodized half blocked ANS Chaos Series gx3 pump with CCM frame, ccm pump kit, CCM auto trigger kit, doc’s detent, some CCM internals (hammer/lug and valve),CCM trigger, inception reg (brand new), PE POPS asa on an inception rail. This is usually shooting with a freak barrel, or my parabolics. When I acquired it in a trade, it was mostly complete, but I added some minor things, like the reg and SSC sled/bolt, and rail/pops. I was hunting for a suitable alternative to buying a second T2, which was out of my range at the time. It came to me anodized so I don’t know who did that but they did a great job, I call it “blood money” since it looks like a drug deal gone bad/ murder scene, but I believe it was intended to be a recreation of the “lava” or "fire" anodizing which was done back in the day. Either way it was done well and really pops in the right light
CCI Phantom (#2) - a VSC back up and loaner phantom, and I was very bored of all black. Has dual undercocking kit, ccm 86 frame, ccm air fittings, asp detent modded body, some laser cut trigger that has a stupid smooth pull, CCI trigger shoe, carbon fiber feed & ghost ring that I made. Usually gets used with a freak barrel, this marker actually pumps a bit smoother than my other phantom, for reasons unknown. I occasionally reconfigure this for open class pump, and run it with a 50 round hopper, grip mounted asa of some kind and peanut tank, or 13ci if I wanna get really small.
PE CS2 in bronze/gold. Nothing done to it except regular maintenance. This thing rips faces and is my favorite high end marker that I’ve owned. Usually shoots with the shaft fl barrel, I do have the mech frame also but this is my primary electro so I don’t use the mech frame all that often.
PE Etha3 M - backup and loaner marker, again only done basic maintenance to this because it kicks ass as it is. I did buy another shaft fl kit for it, consequently it feels/shoots almost identical to my cs2 (in its mech form), which I really like.
please excuse the dog hair, I did what i could to get it gone but my super helpful pup kept finding ways to put it all back.
more individual marker pics below this post.
CCM T2, Gen 1 in dust clear, (almost looks white in person). Typically shoot this with parabolic barrels and/or a freak barrel. Only things “missing” are the original matching CCM fittings and asa, but I’ve got a dust black CCM asa and CCM semi-gloss black fittings, so it works out nicely still.
CCI Phantom(#1) VSC in black with CCM air fittings, ASP detent modded body, blue roller bearing trigger (from rockerpb, I think?), gauged valve body, black hardline kit, CCM 86 frame, purple CCI trigger shoe, dual undercocking kit, clear feed block and carbon fiber feed tube & ghost ring, both of which I made. I usually shoot this with some kind of freak barrel, just depends on my mood.
“Not a T2” custom anodized half blocked ANS Chaos Series gx3 pump with CCM frame, ccm pump kit, CCM auto trigger kit, doc’s detent, some CCM internals (hammer/lug and valve),CCM trigger, inception reg (brand new), PE POPS asa on an inception rail. This is usually shooting with a freak barrel, or my parabolics. When I acquired it in a trade, it was mostly complete, but I added some minor things, like the reg and SSC sled/bolt, and rail/pops. I was hunting for a suitable alternative to buying a second T2, which was out of my range at the time. It came to me anodized so I don’t know who did that but they did a great job, I call it “blood money” since it looks like a drug deal gone bad/ murder scene, but I believe it was intended to be a recreation of the “lava” or "fire" anodizing which was done back in the day. Either way it was done well and really pops in the right light
CCI Phantom (#2) - a VSC back up and loaner phantom, and I was very bored of all black. Has dual undercocking kit, ccm 86 frame, ccm air fittings, asp detent modded body, some laser cut trigger that has a stupid smooth pull, CCI trigger shoe, carbon fiber feed & ghost ring that I made. Usually gets used with a freak barrel, this marker actually pumps a bit smoother than my other phantom, for reasons unknown. I occasionally reconfigure this for open class pump, and run it with a 50 round hopper, grip mounted asa of some kind and peanut tank, or 13ci if I wanna get really small.
PE CS2 in bronze/gold. Nothing done to it except regular maintenance. This thing rips faces and is my favorite high end marker that I’ve owned. Usually shoots with the shaft fl barrel, I do have the mech frame also but this is my primary electro so I don’t use the mech frame all that often.
PE Etha3 M - backup and loaner marker, again only done basic maintenance to this because it kicks ass as it is. I did buy another shaft fl kit for it, consequently it feels/shoots almost identical to my cs2 (in its mech form), which I really like.
Comment