That excal is so so so cool!
Hellion360's Merlins and more: The "Keepers"
Collapse
X
-
-
Rockin and rolling today.
Checked my pressure after playing and the Lazarus valve is shooting good at 200PSI. Really I was skeptical, but it seems pretty good so far.
IMG_5550.jpgLast edited by Hellion360; 12-03-2023, 01:58 PM.Need Inception Designs or Shocktech Products? Let me know!
MCB Feedback --------- MCB Consolidated WTB
old PBN feedbackComment
-
Need Inception Designs or Shocktech Products? Let me know!
MCB Feedback --------- MCB Consolidated WTB
old PBN feedbackComment
-
This would have been hard to give up. Just curious if the frame had side-by-side plate play that contributed to your decision? I'm asking because (I'm sure you know) they were made with and without horizontal glide screws. -
Never saw this comment in a timely fashion. But no, that did not contribute.
I had brass tipped set screws in it and it was solid. The AKA plates are also made quite thick to take up side-play.
The finger grooves didn't match up for my hands, I have slender fingers and this was built for mitts.
-
-
Need Inception Designs or Shocktech Products? Let me know!
MCB Feedback --------- MCB Consolidated WTB
old PBN feedbackComment
-
Need Inception Designs or Shocktech Products? Let me know!
MCB Feedback --------- MCB Consolidated WTB
old PBN feedbackComment
-
I have too many merlins and I am releasing one. You can find it in the High End Mech post.
- RKJ Full Body Merlin
Looks like a classic AKA round body but with 3 pill milling. This one has a lot of minor customization by Ryan Jamieson.



Need Inception Designs or Shocktech Products? Let me know!
MCB Feedback --------- MCB Consolidated WTB
old PBN feedbackComment
-
Need Inception Designs or Shocktech Products? Let me know!
MCB Feedback --------- MCB Consolidated WTB
old PBN feedbackComment
-
An Early Earon Carter Comp. Ended up selling. Owned for ~10 years.
A press fit unibody refreshed by me. Barrel replaced with a PPS nickeled brass in 680 with light wedgits.
Features a mix of ICD and Carter internals.
This marker has shot some famous faces like Painthappy and MAr I don't take this one out as much as I should really. My Phantom gets more SC action, but this is a neat piece. It was originally a darker green which you can see when the grips are removed. but it has faded to a really sweet metallic light green, almost Olive.

Last edited by Hellion360; 05-27-2025, 09:26 PM.Need Inception Designs or Shocktech Products? Let me know!
MCB Feedback --------- MCB Consolidated WTB
old PBN feedbackComment
-
-
Out at the field today with my P-blocked Electric Skies S5.
Threw about a case through it without a hiccup. Shot a lot of kids with this today, only kids because I was the oldest paintballer today.
IMG_6961.jpg
Need Inception Designs or Shocktech Products? Let me know!
MCB Feedback --------- MCB Consolidated WTB
old PBN feedbackComment
-
Out at msg paintball today with my mini p-blocked series 5.
Shot great! Quick and light.
IMG_6969.jpgLast edited by Hellion360; 07-05-2025, 05:58 PM.Need Inception Designs or Shocktech Products? Let me know!
MCB Feedback --------- MCB Consolidated WTB
old PBN feedbackComment
-
Took my orange Works out for an adventure today.
Shot great, no breaks, smooth. Shot it with my 17ci tank and got well over a hopper's worth from it. Almost a hopper and a pod, though I didn't actually run out.
At the end I asked a friend if they wanted to try it. Immediate multiple short stroke shots, the results were as seen lol. The trigger on this one is long and light, I should have reminded him of the needed shooting style... All the way in, all the way out. Must have blended six balls in there.
FullSizeRender 2.jpg
IMG_7056.jpg
FullSizeRender.jpgNeed Inception Designs or Shocktech Products? Let me know!
MCB Feedback --------- MCB Consolidated WTB
old PBN feedbackComment
-
Need Inception Designs or Shocktech Products? Let me know!
MCB Feedback --------- MCB Consolidated WTB
old PBN feedbackComment
-
Comment




Comment