Got this original Spyder with an SE/Speedmaster air setup in a lot and have no use for it. It's LNIB if not NIB. A few small marks in the anno; some from me disassembling, some probably from just being knocked around in storage.
I just went through, cleaned the internals and replaced the valve orings, hammer oring (factory spec materials/hardnesses) and updated the detent with a larger modern one.
No leaks, was shooting at 270-280 fps on 800psi HPA with room left on the rva, and had no issues dry firing.
Also includes Shocktech bolt, Shocktech volumizer, original braided hose, original oil can style hopper with elbow and hose clamp, barrel plug, regular plastic elbow, wrench for fittings, a couple allen keys, some misc machine screws/washers from the previous owner, and a basic rebuild kit I threw together.
Looking to get *SOLD* $100 CAD *SOLD* plus shipping OBO. I'd like to keep the sale domestic for the time being. Any questions please ask.
Sent from my Pixel 4a using Tapatalk
I just went through, cleaned the internals and replaced the valve orings, hammer oring (factory spec materials/hardnesses) and updated the detent with a larger modern one.
No leaks, was shooting at 270-280 fps on 800psi HPA with room left on the rva, and had no issues dry firing.
Also includes Shocktech bolt, Shocktech volumizer, original braided hose, original oil can style hopper with elbow and hose clamp, barrel plug, regular plastic elbow, wrench for fittings, a couple allen keys, some misc machine screws/washers from the previous owner, and a basic rebuild kit I threw together.
Looking to get *SOLD* $100 CAD *SOLD* plus shipping OBO. I'd like to keep the sale domestic for the time being. Any questions please ask.
Sent from my Pixel 4a using Tapatalk
Comment