Just some misc stuff I don't want. I'll probably add more stuff in time. Any questions please ask. This is mostly meant for local pickup but I suppose I could ship if you're really interested.
Automag parts (Only the sight rail remaining): $5 each. Raw (aside from some anno left in the threads in the VASA) and have some deep marks. These would be good if you want to experiment with milling or anno patterns.
XSV Drop: $5
Ninja PTC fitting set: SOLD $5 SOLD for all. I don't like these. They get leaks easily and are hard to connect/disconnect at normal tank pressure. The female fitting has tool marks from using vise grips to get it apart. It could probably be cleaned up with Emery cloth and cold bluing liquid.
Original WGP Autococker LPR: Free. Apparently these are terrible regs. Might be good for completing a display piece.
AA Vigilante: *SOLD* $45 *SOLD*. I just replaced the orings but the seat is older. It holds air and outputs 0-600psi but I haven't tested for shootdown. It's pretty marked up on the outside and the brass adjuster screw is stripped for a hex key but the nickel adjustment slot is ok (you would have to degas to adjust). The hex slot would be easy enough to drill out and broach for the next size up if you have the tools. I would keep this if it wasn't for the adjuster. I can probably include a macro elbow.
Sent from my Pixel 4a using Tapatalk
Automag parts (Only the sight rail remaining): $5 each. Raw (aside from some anno left in the threads in the VASA) and have some deep marks. These would be good if you want to experiment with milling or anno patterns.
XSV Drop: $5
Ninja PTC fitting set: SOLD $5 SOLD for all. I don't like these. They get leaks easily and are hard to connect/disconnect at normal tank pressure. The female fitting has tool marks from using vise grips to get it apart. It could probably be cleaned up with Emery cloth and cold bluing liquid.
Original WGP Autococker LPR: Free. Apparently these are terrible regs. Might be good for completing a display piece.
AA Vigilante: *SOLD* $45 *SOLD*. I just replaced the orings but the seat is older. It holds air and outputs 0-600psi but I haven't tested for shootdown. It's pretty marked up on the outside and the brass adjuster screw is stripped for a hex key but the nickel adjustment slot is ok (you would have to degas to adjust). The hex slot would be easy enough to drill out and broach for the next size up if you have the tools. I would keep this if it wasn't for the adjuster. I can probably include a macro elbow.
Sent from my Pixel 4a using Tapatalk
Comment