Toestr's Misc Items (Updating)

[Toestr]

Free egg carton foam. Great for adding extra padding/dividers in cheap marker bags (JT, GxG, VL, etc). Approximately 9" wide. Let me know what length you need cut and I'll bring it to our next meeting.

Sent from my Pixel 4a using Tapatalk

[Toestr]

Swiss Arms Airsoft/Paintball Vest $25 *SOLD*

Like new, never used in game. One size fits most with adjustment straps at the side. Prebuilt with all pouches sewn in and zipper closure. Not the greatest quality but good enough to get someone started. All pouches are grommeted and have velcro closure unless otherwise stated.

Pouches:

2x rifle mag pouches with elastic inside. Fits 1 Dye Dam/CF20 mag each. May be able to fit 2 mags closer in size to standard AR mags (TMC, T15, Helix, airsoft, etc). Also fits 2x 30rd or 1x 50rd paintball pods each.

2x pistol mag pouches. Not sure exactly what mags will fit but will fit 2x 12g CO2 cartridges each.

1x grenade pouch. Has 3 elastic loops inside. Looks sized to fit 40mm grenades or maybe ThunderBs/smoke grenades Can be used as a utility pouch otherwise.

1x utility pouch on upper right chest.

1x radio pouch upper left shoulder. Has snap closure, would have to be a small radio or a cell phone to fit properly.

1x hydration bladder pouch on back. Very large pouch so any size bladder should work. Has velcro straps and D rings for hose routing. Could probably also hold a false foam 'plate' if wanted.

Sent from my Pixel 4a using Tapatalk

[Jordan]

Do you still have the Mag VASA?

[Toestr]

Yes sir. Sold; to the gentleman with the angry beaver!

[Toestr]

CooperT Nelson Back Bottle Valve Body: $20 *SOLD* with Bushmaster Package

Decent condition, just some idiot marks around the valve nut area (oring sealing surfaces are fine) and anno wear in the threads and where the screws contact (side screws not necessary for back bottle use). Tank pins are depressed against a pressed in roll pin. Never tried this valve myself but I assume the pin is fine and could probably be removed and replaced with a setscrew if adjustment is needed. Works on all nelsons that use a 007 spec valve.

Sent from my Pixel 4a using Tapatalk

[Toestr]

Free Brass Eagle bug eye mask. Obviously NOT FOR FIELD USE, but for display or using as a target only.

Sent from my Pixel 4a using Tapatalk

[Toestr]

Free Tasco EZ Sight red dot. Plastic construction with a minor crack towards the back end. Mounts to dovetail rails. The previous owner made an aluminum mounting block to angle it down for better adjustment range. Looks to take CR2032 batteries but I can't confirm (nor can I confirm it's functionality)

[Toestr]

Aluminum Tippmann 98 Lever Lock Feedneck: $10
RAP4 branded, works well. Offsets the feedneck further to use a red dot sight and gives a taller ball stack. The feedneck itself is threaded (Ion I believe) into the elbow. It uses a captured pin to prevent the feedneck from slipping out when opened (I had to drill out the holes a bit to fit the pin). Also drilled the elbow for vent holes.

Aluminum Tippmann 98 Custom Powertube: $10
Would be great for running a 98 on liquid CO2 *cough* Meleager7 *cough*. Has a nylon setscrew in the velocity adjustment hole to prevent the screw from backing out.

2x Ronin Gear Stock Class Wrist Holders: $5 each
The elastic is loose so I'd only recommend using 10rd tubes with a tethered cap. One is brand new the other I used for one game to hold tubes on a 26ci tank. Both have some thread pulls.

OD 2/3 Point Sling: $10 *SOLD*
Olive drab green 1 1/4" wide nylon sling with aluminum hooks (interior has been filed down to fit QD) and plastic hardware. Never seen field use. Adjustable from approximately 34-46". It looks like regular nylon webbing in person.

[Toestr]

$10 each

Y2Kradle: Ever want a drop that is very dropped, but not necessarily so forward (but could be by rearranging some parts)? Has a 1" clamp to fit a Female Stabilizer, remote line adapter or tank regulator bonnet. Some of the countersunk screws have heads that are stripped/mis-sized.

Viewloader 100rd pod lot: Nice pods, better and more stylish than GxG ones for sure. They have some scuffs/scratches but are all fine in fine condition. One is missing the lid. The previous owner carved his initials into the lids I guess?

Sent from my Pixel 4a using Tapatalk