Why the JT tac-5 recon is better than the 98c

[Magoo]

The few of these I've worked on had really bad velocity issues. Have yours all been able to Chrono fine?

If you were running a 950psi output, it kinda sounds like you were running too much pressure... I remember too much PSI could prevent the valve from fully opening up, leading to low FPS.

[kevin qmto]

The Tac 5 is a better performing gun, but a worse rental. I had a few ex rental Tac 5's, and yeah they take way too long to strip down to clean.

[Trbo323]

The Tac 5 is a better performing gun, but a worse rental. I had a few ex rental Tac 5's, and yeah they take way too long to strip down to clean.

Then I feel like you were doing something wrong if you felt these took too long compared to what else is out there

Sent from my motorola edge 2024 using Tapatalk

[kevin qmto]

Then I feel like you were doing something wrong if you felt these took too long compared to what else is out there

Sent from my motorola edge 2024 using Tapatalk

No I should have said they took too long for the field that used to use them, because they never did it lol. and with a 98, for the most part you don't have to do it, just throw some oil on the bolt every 6 months.

[Trbo323]

No I should have said they took too long for the field that used to use them, because they never did it lol. and with a 98, for the most part you don't have to do it, just throw some oil on the bolt every 6 months.

These are essentially the same though. I don't see how the 98 is going to require less maintenance. A lot of the seals are even the same size. If they are going to wear out in the tac5 I don't see how they magically don't because it's a tippmann

Sent from my motorola edge 2024 using Tapatalk