Back to the field after years off

[MrKittyCatMeowFace]

The problem is trying to find a nice one that doesn't cost an arm and a leg. Not real fond of the plastic 3D printer feeds. I kind of miss the aluminum feeds that used to be easy to find

Sent from my Pixel 3a using Tapatalk

Understandable

I just run a cram and jam setup for my brass eagle tigershark with its factory bucket changer. Electrical tape in the barrel to prevent roll outs and im good to go!

[coyote]

You cannot overdue brass on MCB.

That might be Velcor's first law.

[Cunha]

If you think its heavy, just replace that brass reg.

But otherwise it looks like you're good to go.