Your thoughts on this one.

[FredMnkyDad10]

I really like how this frame works with body and the rest.

What do you y'all think. Should I get the body and the rest done in dust black. Or should I another single color, fade, acid, ghost.

20220730_210507.jpg 20220730_210457.jpg

[zinger565]

Anno's a personal choice, but that frame absolutely goes with that body. Looks really nice, made me double take. Only suggestion is if you're going to go direct from ASA to valve, find a foregrip without the air hole.

[Chuck E Ducky]

Your going to have to Ano the body I say pick a design and color you want. Dust black wouldn’t look bad but I would do the entire thing with a unique Ano of my choice if it was mine. I would do a barrel tip or barrel to match it. Like a nice UL or something.

[BrickHaus]

I'd just leave it mis matched if it were mine. Itll still mow faces.

[pghp8ntballer]

I agree with Brickhaus. Two tone. You can change the body color if you want, but I think that flat, simple body needs a simple color. You could do some multi-color fades too. Honestly, that body and rail in a life saver fade with a polished (or even black as-is) frame and fore grip would be pretty cool. You know like the purple-red-orange-yellow-green-yellow-orange-red-purple. Like the attached pic. Note:lifted from custom cockers… not my gun.

splashes might be a bit much unless you do the whole gun like the old shoebox shockers or slab side cockers.

But I personally don’t like how the fad is everything black. Occasionally it’s nice to see, but if you do that marker in all black, it would look like every other space gun. Just black and blah. But that’s my thoughts on it.

[FredMnkyDad10]

Anno's a personal choice, but that frame absolutely goes with that body. Looks really nice, made me double take. Only suggestion is if you're going to go direct from ASA to valve, find a foregrip without the air hole.

I agree with you on the air hole. That is what I was thinking when I put it together. But if i flip vasa, have air go through the bottom of the gas through foregrip, vasa to valve. It would keep the lines pretty straight and out of the way.

[FredMnkyDad10]

I agree with the all dust black. I already have a dust black in the works so yeah two would be much.

I was leaning towards one solid color, or possibly do it an old school version of the ptp sponge or something like this too. And yes it will have a matching barrel. Going with Doc's freak back his short tip.

By the way if some of you were wondering that is a tac one body. Milled by Luke. 20181010_182622.jpg

[FredMnkyDad10]

I was looking at some builds. To keep with the square lines of the body and the frame. I think an old school CCM on/off would look really good on here. With also a venomous design v1 foregrip or maybe even a Luke's angled one.

Going to see if I can hunt down those pieces.