Information I gatered from automag.org forum and other place, I will also add the link later
-
💀Team Ragnastock💀 -
O-ring Sizes
Still need to add more stuff but its a good start
Classic Valve (for Automag 68 and Mini-Mag; 1 rebuild)
4 Power Tube O-rings 010
4 Teflon O-rings 006
2 Barrel O-rings 018
2 Reg. Piston O-rings 012
1 Reg. Body O-ring 116
RT Classic (1 rebuild)
3 Field Strip Banjo O-rings 009
3 Barrel O-rings 018
2 Power Tube O-rings 010
1 Reg. Piston O-ring 012
2 Reg. Seat O-rings 008
1 Reg. Body O-ring 018
2 RT On/Off Small O-rings 004
4 RT Reg. Valve Pin O-rings 006
Level 10 Bolt (1 install)
2 Carrier O-rings 008
Attached Files💀Team Ragnastock💀 -
-
Airgun design video
Automag classic
https://youtu.be/6eKZJ9YYp4I
Automag RT
https://youtu.be/IWwf_dihvDw
Xvalve exploded view
https://www.automags.org/forums/show...-valve-diagramLast edited by Alexndl; 07-14-2020, 06:57 AM.💀Team Ragnastock💀Comment
-
Pump Mag
Info on pump arm
https://www.mcarterbrown.com/forum/p...gle#post814707
Classic rail dimentions from Luke Custom
https://lukescustoms.com/index.html
@LukeAO
https://www.mcarterbrown.com/forum/p...ge2#post773752
Last edited by Alexndl; 03-31-2026, 07:16 PM.💀Team Ragnastock💀Comment
-
-
Got one for flatlines?Comment
-
💀Team Ragnastock💀Comment
-
RT reg body oring and barrel oring are not the same. Barrel is 018 but RT reg body is not.Comment
-
Adding this. Thanks to LukeAO for first showing it to me
Sent from my motorola edge 2024 using Tapatalk
I use Tapatalk which does NOT display comments. If you want me to see it, make it a post not a comment.
Feedback
https://www.mcarterbrown.com/forum/b...323-s-feedbackComment
Comment