Long CCM fittings shafts

[Chuck E Ducky]

CCM made some XL fitting pieces to clear rails on mags. You guys see these? I just snagged two for my build figure it will fit a lil nicer.

Still going to need a set of fittings but should help clear the rails on some builds.

https://store.chipleymachine.com/ccm-air-fitting-post-long-automag/

[superman]

Are these the same length as the standard long ccm fittings?

[Chuck E Ducky]

I can measure them when I get em for yah. CCM standard fitting sit almost flush with a reg or ASA. These look to have a longer threaded section so like on my build with that Nummech frame I got from you the fittings will clear the Luke’s Rail I got better. I grabbed 2 of them may only need one for the valve.

I didn’t realize CCM made two different length ones. All my fittings are the older style ones that are finished a lil nicer then the newer ones. They all are designed to be mounted almost flush.

[Chuck E Ducky]

Ahh got yah well for that we thank yah… lol

I got a set on the way sounds like they were made to do exactly what I need them to.

[superman]

standard length on the valve and long on the frame.

[Chuck E Ducky]

That’s what I was thinking but I got two just in case. They are only $10. I got the standard to seal up but it’s just barely in there. I’m hoping it will aline better so valve removal and install is a lil easier for maintenance.