Classic valve question

[Drone31]

Can you take a classic valve and put it into a working x valve marker?

[nak81783]

The great majority of the time, yes. Sometimes, small adjustments are needed.

[PumpMan10988]

The short answer is yes. Some concerns would be swapping an original RT Pro valve (these are different... somehow), or using an Emag frame that needs a different on/off pin. As far as I understand it though, the valves are the entire operating part of a Mag. If it works in one body, it should work in another.

[superman]

Classic rt is the one that is different.

[FredMnkyDad10]

Yep, like said above might need just some slight tuning. Like superman above said the only valve you can't switch is the Classic RT mag. The airline is fed into the rail, not directly into the valve. And uses a banjo bolt to feed the air from the rail into the valve from underneath.