Stock Class Feed

[Jsc5150]

I’ve seen a few SC mags around, how did they achieve the stock class feed? Hoping there is a simple mod to attach a phantom feed

[cougar20th]

The couple I did I removed the original feed, welded a nut to the body, hollowed out the bottom of a delrin phantom feed to hide the nut.

This is the one I did for myself.

[Meglomachinist]

Cougar that mag is so damn sexy.....really well done my friend.

[Pumps4ever]

so sick dood!

[Magageddon]

assuming your running a ule body, you can cut a delrin phantom feed to fit the square contour shape of the ule body feedneck area, that'll provide stability. Then drill and tap a hole just in front of the feedneck hole to mount the phantom feed block.

[Chaos]

When you're ready I have some nice 3d printed stock class feeds available

[JonM]

The feed I did was as simple as removing the Feedneck from a stainless body, drilling and tapping the body, and shortening the screw to where it didn’t interfere with the barrel. Yeah, it was held on by only a couple threads, but it worked fine.