Stainless braided line?

[Wallock024]

For classic mag, what is the proper SS braided line length for the crucial asa to valve with a QD? Looking to replace macro currently. I've read mixed things all over the internet now with 4", 4.4", 5"
I have a power feed body, hopper left. Looking to have only one bend and run it straight to the valve, not an arch up high over the feed if possible.

[CFEL08]

Is the ASA mounted to the rail or to the bottom of the grip?

[river031403]

Get a long zip tie place in from point A to point B that should be your measurement less the fittings

[Drcemento]

It depends allot on your fittings I used 4 1/4" when I ordered mine and it worked with the nicer quick connects I used.

[CFEL08]

Get a long zip tie place in from point A to point B that should be your measurement less the fittings

I did similar with a piece of string, but the zip tie is better idea.

[Wallock024]

Okay.. Thanks all..