single trigger frame ?

[LittleSnail]

Hi everyone I need to build or buy a single trigger frame for 10man. Anyone have any spare frames kicking around? If I build a frame I would like it to be able to turn it into a Pneumag frame.
I have a G-Force frame already I might be able to swap the trigger out of that frame to a single trigger if anyone has a single trigger for that frame?
Any help or guidance would be appreciated. Thank you all have a great day!

[Reflex0283]

I might have a stock CF trigger frame soon

[LittleSnail]

if you have a pic post it please I may still buy frame?

[1snowridr]

Just buy a Lukes frame. You can use them as either a regular frame or add his LPR & Trex and go pnuemag.

[LittleSnail]

I might do this option ty .

[CatFarmers]

Second the Lukes. I have 3 LC frames and they are all good to go. My single trigger frame is the MP90s and ready for the kit, which he now offers.

[superman]

pneumag frames aren't allowed for mags in 10 man. It falls into a weird trigger assist category. just a heads up.

[LittleSnail]

I call paintball conspiracy or something lots of marker's shoot fast to target certain ones !!!

[FredMnkyDad10]

pneumag frames aren't allowed for mags in 10 man. It falls into a weird trigger assist category. just a heads up.

But with Luke frame, single or double trigger you can easily go from pneumag or just regular mech frame by removing the T-rex and lpr.

or you can have the Luke frame keep it set up as pneumag. And get a simple single trigger carbon frame. Even easier to swap out frames.

[superman]

Of course he can pull the pneumatics out, or swap frames. I was just letting he know the rules say he can’t use pneumatics.

[LukeAO]

Is it a mechanical or pneumag? lol

[1snowridr]

It's pneumatic, I know because it has a side kick and no block off plate between that and the frame 😉

[Walker]

Luke, that is a very nice looking gun, and I love the anno....

[LukeAO]

It's pneumatic, I know because it has a side kick and no block off plate between that and the frame

On my frames you can just plug the LPR port so you can use the Sidekick and Micro Wedge with mechanical setups.

[1snowridr]

Oh you tricky tricky!

[Calvin]

So, a pneumatic valve actuating a piston to the on/off in a mag is illegal in mech competition. How does that fundementally differ from the trigger valve in an emek? In the emek the valve distributes air to actuate the bolt forwards and backwards which also functions to release a stored air volume to move the ball. There isnt even a sear involved. If pneumatics in an automag invalidate it as a competition mech, why are spool valve mechs allowed at all? Asking from the genuinely ignorant point of view of someone who has never been in a tourney.

[StaticShocked]

I ended up with this exact question after reading the posts above. So is a mech framed 180r considered mech enough? Would a stock x-valved mag be considered acceptable or does the oj/off make it fall into assisted?

[superman]

an xvalve mag is legal as long as it does not rt.

[Calvin]

So, would a pneumag that uses a classic valve be legal? If so, I can see that logic. It's the pneumag setup in the grip being illegal that has me scratching my head.

[fierymartel]

So, is it a classic valve pneumatic frame marker legal to mow Muppets in a big game?

[Ecapnation]

So, is it a classic valve pneumatic frame marker legal to mow Muppets in a big game?

Yes, there's no marker limitations for most big games

[pneumagger]

On my frames you can just plug the LPR port so you can use the Sidekick and Micro Wedge with mechanical setups.

Can the LPR not “turn off” by just completely backing the adjustment screw out? Seems like that’d be easier than pulling the whole LPR out or having to install an intermediate blocking plate.

(I’m not sure how your LPRs internals work, but the common family of small WGP LPRs can be “shut off” that way.)

[LukeAO]

Can the LPR not “turn off” by just completely backing the adjustment screw out? Seems like that’d be easier than pulling the whole LPR out or having to install an intermediate blocking plate.

(I’m not sure how your LPRs internals work, but the common family of small WGP LPRs can be “shut off” that way.)

Sure, but not all people own the LPR but may still want to run my Sidekick, so that port needs to be blocked.

That said my LPR's are designed to be installed in a grip frame so they are easy to install and remove. Plus with the oring seal you dont have to futz around with thread sealer..