Sydarm leak

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • Trbo323
    MCB Member
    • Jul 2020
    • 6182
    • Vancouver WA

    #1

    Sydarm leak

    Ok, I have another absolute gem from Super Nova today. A plastered sydarm. This thing was caked in paint 20 years ago and then put on a shelf to let all that paint dry up and turn to goo.

    Got the paint all sorted but I have a persistent leak down the barrel. Ok so power tube o ring right? Replaced it with a fresh 010. Originally it had a spring spacer in it, I took out the spring and replaced it with a spacer from another mag and it still has the leak.

    I feel like it has to be something stupid that I'm overlooking but need the mcb brain trust to smack me with it.
    I use Tapatalk which does NOT display comments. If you want me to see it, make it a post not a comment.

    Feedback
    https://www.mcarterbrown.com/forum/b...323-s-feedback
  • Magageddon
    Certified Post Whore
    • Sep 2020
    • 1253

    #2
    what size is you spacer? .220 and .215 spacers I've had good luck with those sizes. If you just used a generic O ring and not an ADG specific o ring, that could also be your issue.

    Comment


    • ThatBobbyjoe
      ThatBobbyjoe commented
      Editing a comment
      I was just about to @ you on this lol
  • Trbo323
    MCB Member
    • Jul 2020
    • 6182
    • Vancouver WA

    #3
    I've tried both the agd (poly) ring that was in it already and a new buna. I really didn't notice a difference either way. The spacer is blue, no sizing on it

    I just realized I never changed the ring on the power tube tip, I'll try that next for sure.

    But 2 different rings and both the spring and spacer don't seem to make a difference which is why this is confusing me. If there's air in the power tube it's leaking out
    I use Tapatalk which does NOT display comments. If you want me to see it, make it a post not a comment.

    Feedback
    https://www.mcarterbrown.com/forum/b...323-s-feedback

    Comment

    • dano_____
      Tinker Tinker
      • Jul 2020
      • 318

      #4
      I have had what I thought was air leaking down the barrel and it's actually coming from the on/off orings. I'd try rebuilding that.

      Comment

      • Trbo323
        MCB Member
        • Jul 2020
        • 6182
        • Vancouver WA

        #5
        Originally posted by dano_____
        I have had what I thought was air leaking down the barrel and it's actually coming from the on/off orings. I'd try rebuilding that.
        I did already.
        The leak stops when the trigger is held which means the on/off is stopping all air when the trigger is held. I just don't see with how the on/off is functioning that it can be the issue
        I use Tapatalk which does NOT display comments. If you want me to see it, make it a post not a comment.

        Feedback
        https://www.mcarterbrown.com/forum/b...323-s-feedback

        Comment

        • nak81783
          Last of the Salzburg Clan
          • Feb 2021
          • 609
          • DeWitt, MI

          #6
          Are you tightening both frame screws with a wrench? Does the tone of the leak change as you tighten the field strip screw? If so, there’s an alignment issue, and you’ll need to get the torques right to bring everything into alignment.

          Is the rail bushing present?

          Maybe try a different bolt.

          It could still be the lower, outer oring on the on/off presenting like a barrel leak when the trigger is forward. I’m not clear from your previous posts if you changed that one too.

          A blue spacer? I thought they were all brass. Can you get a length measurement of it with calipers?

          Whats the condition of the sear? Is the bolt latch portion sharp or rounded?

          Also, is there the credit card thickness gap between the back of the trigger and trigger rod when gassed up?

          Comment

          • tunaman5
            MCB Member
            • Jul 2020
            • 341

            #7
            There is a small buna oring in the body that most dont even know is there. Check that. Dont bother changing the powertube tip oring as that is a static oring and wont leak. It just holds the Powertube tip from getting loose

            Comment

            • nak81783
              Last of the Salzburg Clan
              • Feb 2021
              • 609
              • DeWitt, MI

              #8
              Originally posted by tunaman5
              There is a small buna oring in the body that most dont even know is there. Check that. Dont bother changing the powertube tip oring as that is a static oring and wont leak. It just holds the Powertube tip from getting loose
              Hey Tuna,

              I’ve never owned or worked on a Sydarm that I can remember. Does the oring you mentioned seal the air channel from the 12 gram to the valve? Thanks.

              Comment

              • dano_____
                Tinker Tinker
                • Jul 2020
                • 318

                #9
                Originally posted by Trbo323

                I did already.
                The leak stops when the trigger is held which means the on/off is stopping all air when the trigger is held. I just don't see with how the on/off is functioning that it can be the issue
                The leak is possibly the orings on the lower body of the on/off or the inner oring the the pin slides through when you take the on/off apart. It will stop leaking when you pull the trigger because the upper oring is still sealing against the Teflon oring and stopping the airflow.

                Comment

                Working...