ANS LPR seat

[XEMON]

Hello MCB,

Finally got to look at my cocker, and found some debris inside the 3-way ... took me a minute to find the source, the LPR seat is falling apart.

Whats a good place to get replacement seal for this?




Thanks ya'll
X

Edit:

I made a 3D printed seal, will see how it holds ...

Edit 2: Aired it up, it regulate and seal properly!

Here is the .STL:

ANS LPR seal - XEMON.zip

[Knuckle Dragger]

ANS has a rebuild kit for their Jackhammer 2 if thats what you have. https://www.ansgear.com/ANS_Jack_Ham...p/ansjhreb.htm

[MrKittyCatMeowFace]

ANS has a rebuild kit for their Jackhammer 2 if thats what you have. https://www.ansgear.com/ANS_Jack_Ham...p/ansjhreb.htm

Can you use that rebuild kit for a jackhammer 1?

[Knuckle Dragger]

I don’t know. I have no experience with those regulators, I’d email ANS if no one here knows.

[XEMON]

Thanks all, this is for an ANS adjustable LPR.

I have great results making seat for Sheridans so i gave it a trial (.STL file attached to first post):

[Knuckle Dragger]

That’s awesome! I should have jumped in the 3D printing bandwagon. So much cool stuff

[baconquilt]

I believe the internals for the jackhammer and jackhammer II are the same. Or all jackhammers for that matter.

[XEMON]

I have a sock WGP non externally adjustable, and the seat doesnt match with this externally adjustable ANS LPR.

I think i may be calling "Jackhammer" and "Jackhammer 2" the wrong thing ...

[baconquilt]

WGP's version is called the sledgehammer and not the same. I hope I didn't confuse.

There were multiple versions of the jackhammer all with different milling but the internals were all the same.

[PandaMedic316]

ANS still sells these for relatively cheap... Incase your 3d printed model doesnt hold up. https://www.ansgear.com/ANS_Jack_Ham...p/ansjhreb.htm

[lew]

There were multiple versions of the jackhammer all with different milling but the internals were all the same.

Yep, they're all the same.