what sort of pump options are there to convert these cockers? I know they need the mini pump arm. Anything else to consider?
-
-
I converted one over a little bit ago. I'll try and find the post via the wayback machine, but from what I remember:
Mini Pump Arm
possibly some o-rings for the valve
I replaced the feedneck with a clamping feedneck from ANS
that's about it.
I bought the Inception pump kit and it works great after fixing some o-rings in the valve assembly. -
The Inception Designs mini Drift pump kit works well. Then basically any frame you want. The one below also has the Inception Designs high flow valve and that eliminated any farting.
Edit: Also the holes in the body where the frame screws go aren’t normal threading. Keep the stock Superbolt screws to use. If you need different length screws for the frame you choose, that could be a trip to the hardware store or Amazon.
Last edited by heyzeus; 08-10-2020, 05:56 PM.Comment
-
I threw a CCM kit on one a decade ago. It was the "travel and poor playing conditions" gun.
Trouble free and consistentComment
-
I have to get a pic of the one I got from someone on here. I cant remember who, I'm sure they will come out of the woodwork eventually. He ended up tapping a hole in the body for the air line so he wouldn't have to use a mini kit.
here’s that gun.
Last edited by autococker04; 08-13-2020, 05:33 PM.Comment
Comment