Freeflow build opinions

[Macdave06]

Picked up a FF lotus locally to build out and use up some spares. I was intending on using the original front block with a palmers LPR until I discovered the ram hole had been rethreaded to a larger size. Now the question is, do I run this system X setup I had laying around or should I just helicoil the front block threads and run the original front block?




Sent from my SM-G960U1 using Tapatalk

[latches109]

Helicoil is my vote. I have an extra new free flow ram if you need one

[Macdave06]

Helicoil is my vote. I have an extra new free flow ram if you need one

That's an SMC thats on it currently. Someone had rounded the front off so I filed flats back in it and polished it a little.

I'm hoping maybe somebody had helicoiled it already and the helicoil came out when they pulled the ram. Cause its big enough that I can wiggle the ram in the hole.

Sent from my SM-G960U1 using Tapatalk

[latches109]

Yours is missing the Freeflow sticker
Not all SMC rams were the same. Moody had the best one