Where to buy cocking rod “doughnut”

[desertT1]

That’s how it’s spelled in the manual. Mine literally crumbled on one of my cockers and I can’t seem to find one anywhere I would guess to search. Autocockerparts.com has a lot of parts I might have to grab, but not these.

[BrickHaus]

I think you will yeild better results searching for a cocking rod bumper.

Looks like Inception makes em. Id buy from them if I needed one.

[superman]

https://www.inceptiondesigns.com/COCKING_ROD_BUMPERS_p/cgp-0056.htm

https://docfirepaintball.com/products/cocking-rod-bumpers-kock-rings?_pos=1&_sid=ca1e323c8&_ss=r

[BrickHaus]

I was just circling back to suggest he pm you Superman. So I assume you don't have these on hand?

[superman]

I do have some on hand, but not in enough volume to really sell.

[desertT1]

Bravo, thanks.

[Toestr]

Is there a reason regular orings aren't used for this?

[superman]

000 series orings can slip into the cocking rod hole on the back block. 100 series orings may work but i bet they don't have the same life as cut bumpers.

[Ecapnation]

McMaster carr... Look up grommets with a 1/8 hole

I've been using those for years with great results

[zinger565]

Ah, thanks Toestr, that makes sense now.

[superman]

he does not mean like a bushing, but on the rod like a normal bumper.

[Ecapnation]

Yeah implied but not stated.... Use in place of the bumper.... Works great

Mmc part number...

9600k17

[XEMON]

Neutering rings works really well too 👍

[Cdn_Cuda]

Nuts to that! Or …. well … no nuts to that?!