Need assistance with auto trigger timing.

[himurax13]

Hello all,
I need assistance with the timing of my Inception Designs Pump kit on my 03 Pro Stock Autococker that was converted into a sniper. I have an ANS .45 Slider Frame installed.

I am not sure how the arm is supposed to be situated on the safety cam. Using the auto trigger does absolutely nothing. The trigger releases the sear properly when not using the auto trigger.

Thanks in advance.

John

Sent from my SM-G970U using Tapatalk

[Handy]

What trigger frame are you using? Inception Designs as well? By "does absolutely nothing", do you mean you can hold the trigger and the gun doesn't fire at all?

[iamthelazerviking]

Sounds like you need the proper trigger plate that allows for auto trigger and likely drilling the frame to use the auto trigger cam

[himurax13]

I was finally able to time the auto trigger. It seems that having the screw under the trigger plate set to no slack makes it impossible.

Once I increased the slack, I was able to get the auto trigger working. Then I played with the back block position on the pump rod to fine tune it.

I have no clue what safety cam or auto trigger arm is on here but the trigger plate looks like the one that comes with the ANS slider frame

Sent from my SM-G970U using Tapatalk