EBlade boards?

[GenPunishment]

I’ve been on the hunt for an eblade board that has tournament legal settings. I’ve seen the sci-fi boards but they seem to be hard to come by / out of stock. Are there any other options out there? I currently have an e1..

[superman]

They can all be made tourney legal, the issue becomes when someone wants to see that the gun is capped on the board instead of testing it. Older boards the adjustment has to be done with the filters/timing. The scifi board makes it too easy to adjust and show that it is capped correctly.

[GenPunishment]

Understood, so sci if is the only off the shelf option for a modern eblade board?

[superman]

Now that i think about it the morlock board might be an option too, but is much less plug and play as it is a universal board.
I highly recommend the scifi board though. I have not had a chance to try the newer morlock boards.

[Blackmagic71]

You could also consider the Tadao Yakuza eblade board or the scenario dreams T-board.

If I remember right the system x eblade v1.07 had a ROF setting as well, but my memory might be fuzzy on that one.

[superman]

system x boards were awful. The tadao board screens don't last. I dont have any experience with the t boards though.

[latches109]

why are system x boards bad?

[superman]

maybe it was just the one i had. I had issues with the board keeping the rof setting, reading eyes and other stuff. Ended up swapping the board.

[Roger7pball]

I installed a Morlock MK3 in one last year and agree that the SciFi AC board is the way to go. The MK3 is more than capable but you end up with a busier wiring layout etc. The SciFi is a very clean & easy install.

[GenPunishment]

Thanks for the info. Sounds like I’ll have to attempt to reach out to sci-fi to see when the next round of stock will come around (or if at all)