CCM feedneck swap

[jpdgas]

While I wait for my mozak frame I thought I would swap out the CCM feedneck for a lever lock version. I haven't had much luck researching the process or the correct part and I don't want to risk damage to the body due to my ignorance.
Is is possible to mod the CCM feedneck with a lever screw set?
If I have to swap it out, does it just unscrew and the new one screws in?
Any additional info is appreciated.

[superman]

That is a clamping feedneck.

[Chuck E Ducky]

You just replace the existing bolt with the lever one. Keep in mind it will permanently mar the finish on the clamp. I won’t use them unless they have already been installed and the clamp finish is already messed up.

Im assuming you’re talking about the lever lock. Because that feedneck already has a clamp on it.

[jpdgas]

Edited for correct terminology. Yes, I prefer a lever lock style and replacing the existing bolt would be ideal. I'll poke around and see if I can find one.

[Chuck E Ducky]

CCM had brass ones in stock

[jpdgas]

I haven't been able to find it on their site, do you happen to have a link?

[Chuck E Ducky]

eBay has one. Scalper price but they got one. Keep in mind it will permanently damage the finish on the clamp and they don’t work all that well.

https://www.ebay.com/itm/364730552422?itmmeta=01HQHFHMYJQ33498BD6KVYMY9T&ha sh=item54eba29066:g:BIUAAOSw-jtlybHJ&itmprp=enc%3AAQAIAAAAwKrfqIhi5Q%2FGLiFktRU QRUwK8YTtgfXr7JJcT7Iud4%2FmVlx1WVkdN%2BXwnA5ouWqe2 LPCjUAoPZkmnbwLibLMjyBhT4rTt4JXwZq5UhmC%2Bkn8NNrEo %2FyHPSOxqHiCLUbAEGHQJto2zGxZT9IazE4pxU%2F742yAJhF xVlo2GJOWO4JDCjMYmJPUh52AGxhUsETifUdaXwxjdZeUKzc3S EPHBJhygTliU1igmVKvR3NQsbaDCjiKzQByo748xNOCtFPFrw% 3D%3D%7Ctkp%3ABk9SR6rPxq-8Yw

[superman]

For that price i may let some of mine go.

[Chuck E Ducky]

I replaced all the clamps I damaged with it and sold my lever locks with the damaged clamps.

[Chuck E Ducky]

Apparently I still have one.