Garage Sale Find

[Swedgin!!]

Greetings! I want to share a garage sale find I picked up a couple weeks ago. I’ve always wanted one since the mid 90s when I started playing but could only snag a Vm68 and a ranger pump (still have them). It was too good to pass up and my knowledge only goes so far when dealing with Autocockers so this will be a learning experience. It is missing parts and it came completely disassembled, even down to the ANS hpr. I didn’t ask why and I don’t know what the owners intention were.
No pneumatics, just an incomplete PPS Micro Reg, missing the valve body. I do have the lower internals and the majority of the hardware in a bag. Like I mentioned it’s completely disassembled. Looking for more info and suggestions/knowledge to get her up and running, eventually. I just wanted to share with y’all because it’s my first.

#67353

[Pumpytrilly1]

Love the right feeds. Just a heads up I think it's a pre 2k banjo bolt based off pictures.

[Magageddon]

You've got a pre 2k prococker body, pretty sure milled by chris cole? Check your breach after threading a barrel in, I used to have this same body that had an off center milled breach and caused all sorts of problems

[Fossilhead]

You have way better garage sales than I do.

[Swedgin!!]

I went early and got lucky. I spotted a JT shirt on a for sale rack and asked if he had anymore goodies.

[TwonTamal]

That's what I was thinking, I never find anything worthwhile.

[scottieb]

That's a 32* body.

[Hellion360]

confirm 32 degree model is the "prococker" I believe.

[Swedgin!!]

Ah knowledge. It’s a pre2k. I wonder what year it was made? I got some reading to do and the journey begins. It’s been awhile, feels good. Thank you all, keep it coming🤓

[Grendel]

I can not make out the serial number in you images so here is a link to Thumper's original dates compiled years ago. These are approximates but IIRC 32 degree used WGP extrusions so the SN# should be reasonably close. I suspect that body is circa '98-'99.

https://pastehtml.com/view/c9halptdq.html

[Swedgin!!]

I’ve found that listing for serial numbers before I passed out last night. According to the list it looks to be a ‘99 as you stated.