Parts identification

[Retired Portagee]

I put my first post in ask the experts not seeing the marker specific section. So here's a pic of parts I found in my old bin that I stored with the markers. I'm not sure on how to identify the rams. If my memory is correct the brands were dye, kapp, sto, eclipse, palmer and possibly ccm? Please help me identify the rams in the picture and the one on the marker. The ram on the marker the only part that I'm not sure on what brand it is but it has built in qevs. I'm not sure what brand the half delrin/metal bolt or the 4way valve. The reg is an old school ans and I'm not sure where it came from. Have fun with figuring out what the ram brands are.

[jetenginekyle]

Rams are wgp, shocktech, dye i think, ccm and eclipse. 3 way is a belsales hollow point. Back blocks are system x. Gold bolt its ans. Not sure on the lpr and other bolt.

the ccm and eclipse rams are worth a good amount and so is the hollow point.

[Ecapnation]

Back blocks are ANS from the gx series

[k_obeastly]

I would guess WGP karnivore ram except the extra rings around it.

[Retired Portagee]

Rams are wgp, shocktech, dye i think, ccm and eclipse. 3 way is a belsales hollow point. Back blocks are system x. Gold bolt its ans. Not sure on the lpr and other bolt.

the ccm and eclipse rams are worth a good amount and so is the hollow point.

Aloha,
The lpr is a old school ans. The bolt I am at a loss also. I also have no clue what things are worth now days.

[jetenginekyle]

I've seen the eclipse rams with qev sell for $200 on ebay. There are still parts available to rebuilt these if you want to go the route of selling as working/tested as it likely needs a rebuild. The ccm ram im not sure but ccm stuff cost a lot these days so I'd list it for $200 if it were mine. For the 3 way not too sure on the price but don't let it go for less than 100.

[latches109]

if the eclipse ram is without the branding I have a project it would fit.
if you are selling.

[Retired Portagee]

I was thinking about restoring the gx-3 and the Excalibur then hang them on the wall. The eclipse ram is unbranded I will attach a closer pic. The 4way is a little scratched up but the rams look pretty good. I'm still unsure what I'm going to do with everything but you got me thinking.

[latches109]

If you do not mind the branding, I can swap for one with + extra. Unbranded are an earlier version, for period restoration the branding sticks out to me.

[minimag03]

I thought this would be considered a Gen 1 Belsales ram. I didn't know Eclipse had unbranded ones too, that cool. Is the 2-tone a feature of these early Eclipse rams?

I bought a few unbranded gen2 Belsales ram from Compulsive around 2012. I really wish I would have saved those lol

[Magmoormaster]

The ram on the gun appears to be an MP4 ram. The far right chrome ram is not eclipse, it's a Belsales .44 ram. Functionally the same thing lol but different name. If the black ram is from DYE, it will have the DYE logo on it.

[Retired Portagee]

With everyone here helping identify the parts it all comes back. I had the hollow point and 44 on a hinged mech with palmer regs. The 44 blew and I had to buy a ram in a pinch and tried the dye. I then tried the ccm but it seemed slow. I threw the mp4 on because of the built in qevs on the gx3. The bolt and block I changed out for ccm delrin for less mass. The one bolt I'm at a loss what brand it is. It's half delrin and half metal and I never ran it much by the looks of it. Thanks everyone for all the help. You forget a lot in 20ys.