2K Back Block w/ 98 Body?

[Toestr]

I have a 98 bodied cocker that I bought a 2K ID bolt for (it was a good deal). I'm looking for suggestions on 2K back blocks that will keep the overall aesthetic (ie slabby and preferably with the angled bottom). Matte black would be preferable but green, clear (or pewter etc) and black in either gloss or matte would probably be acceptable.

[superman]

Are you sure that is 2k length and not evo length? looks a bit on the short side.

[Toestr]

Yeah it's definitely 2K.

[OpusX]

Kapp made some slant back pre2k looking back blocks with 2k bolt hole spacing.

Seems IISport still has them around.

https://iisports.com/products/2000-autococker-paintball-gun-kapp-2k-lightweight-back-block-black

[Toestr]

I was just looking at these. It looks like it might be delrin? Not sure how I feel about the pump arm threads. Also not sure if the larger diameter of the rear of the bolt is able/meant to fit inside the block or if the bolt is supposed to be a straight diameter.

[Ecapnation]

Not delrin no.

[OpusX]

I can confirm they are aluminum. I have one on my 12g sniper build.

Edit: Mine is pre2k spec, but same thing. I have a chrome 2k spec one and the diameter allows for the bolt rear flair to fit within the recess.