Racegun Revival

[sherman120]

Know this is an old post but thought I’d add field one has put out a LiPo battery that uses the same connector as the race boards
Voltage is 3.7 and 500 mah I haven’t had a problem running it in my gun same with Rory from ans though I do find them a little awkward in the frame especially with the I assume heat shrink around the connector I assume as a reinforcement photos were uploaded from iPhone and guess don’t convert to well but you get the idea
can find on several different shops

https://fieldonepaintball.com/produc...po-battery-kit

https://ansgear.com/field-one-force-...-kit-11901007/

and don’t know if your looking for a replacement as a better option or just replacements as far as I know smc still makes the model in the racegun I use it’s not the f1 noid

https://www.smcpneumatics.com/SYJ3123-SLOU-M3.html

[mercpb]

if not here, post in WTB --- i forget who else had/made them but there's a few people around that can do so

[Jaan]

Are there any battery packs left? I just ran across this thread when I noticed my Raceframe battery is leaking and I searched for the battery pack. I'd love to get at least one Raceframe going.

[baconquilt]

OK so it seemed like it started to charge. The LED on the on/off switch was flashing green/red. The green LED stayed lit when the red LED lit up. Is that an "orange" color in the manual or are the colors just red and green flashes? I didn't know if there was a diagnostic chart showing colors and flashes.

Anyway, after about 10min, I got a error buzzer from the sound of it. The speaker on the board was pulsing on and off to sound like a error tone. Is that the tell sign of a bad/dead battery? Something else bad?

[baconquilt]

[baconquilt]

Trying to revive my Frankenstein. A Race powered MQ slider RF. Hoping the battery takes a charge.

[mercpb]

good news! yea I would have been surprised if ghosted too, not the vibe I'd gotten

[Sharkytrav]

Got a very nice surprise package today with all my stuff back from DarkApollo. He spent a good amount of time on this gear and made some major positive progress in getting it running. It isnt 100% yet and that is okay, the last little bit seems like a hardware issue that I can fiddle with myself.

I was never really worried that my stuff had disappeared and I hope everyone else who needs stuff back gets a nice surprise package this week. And I hope Racegun revival keeps returning markers back to life.

[Super Nova]

I sent him my race vertebrae for a new battery and got it back pretty quickly but that was a few months ago

[Sharkytrav]

No new news

[Trbo323]

Super Nova . Send like this thread may be off interest to you

Sent from my motorola edge 2024 using Tapatalk

[dkfactor]

Any update?

[SETHZILLA!]

I haven't heard from him in a while either. I just want my Freeflow back if the Raceframe board isn't salvageable. I have the mech frame ready.

Sent from my SM-S921U using Tapatalk

[Sharkytrav]

Anyone hear from darkapollo recently? He has been working on a marker of mine since 1/24 and we have had a pretty good line of communication going, but I haven’t had a response since 3/6. Starting to get a little worried.

[Majinebz]

To do this on a excal frame it had to be UL milled first Then additional milling for the com port, touch pad, contoured in the front for the board to slide in and a new hole drilled to pin the leaf spring switch hole.

The leaf switch also has to be desoldered and resoldered on upside down on the board to be in the correct position for the trigger to activate.

Its is a tight fit as you can see with the old battery. But works as it should.