What autococker body is this?

[patrickw8787]

I picked up this body on ebay a while back, it came with a karni front block that looks like it was modified to fit the body. The feed neck is one piece with the body, and it almost looks like a custom job, but I was curious of anyone knows what this body or anything else about it.

[superman]

This looks like a wgp unibody that was modified. You can tell because of the hump between the feedneck and the ball detent.

[Ecapnation]

Looks kinda home brewish but I agree with the use of the unibody

[scottieb]

That's a nice looking body. I like the work on it.

[Alexndl]

Is the front of the body milled for a karni front block or the front block was milled to fit?

Either way, the work on the body is clean and will make a really nice mid block build

[patrickw8787]

Thanks for the info!

It looks like someone milled the body to fit that particular front block. A typical karni block wouldn't fit because it has the internal twist proof key, but this one has been milled back to make a twist proof shelf. An older 2k block would still work, except it would twist freely due to a gap from the bump out on the front.

I sent this off for some work before taking a good photo of the front but will let everyone know how it turns out.