Valve Question

[RustyShackleford]

I have a midblock autococker that is in a slow process right now of being built. I hope to do a big thread on the build someday once i get everything together. I am about to purchase a valve for it-I plan to keep it simple and get the AutoCocker Lower Gold Valve Kit from Autocockerparts.com OR the AutoCocker Low Pressure Valve Lower tube Kit. I do plan to keep this part simple. The gold valve kit has a rebuildable exhaust valve which I like the look of! Just wondering if the Low pressure kit might be easier to tune or just be better overall? Thank you guys!

[superman]

Both valves are copies of other valves.
gold valve kit is a copy of the ccm kit.
Low pressure valve kit is a copy of the shocktech rat valve.

It really depends if it is going to be mech or pump. I would recommend going with the Shocktech valve over the autococker parts valve for a mech.

The shocktech rat valve is easy to tune. Set the reg to 300 psi and IVG 2 turns in and you should be shooting about 300fps. I recommend going with the whole lower tube instead of just the valve.

I have them in stock should you decide to go that route.

[Cdn_Cuda]

Getting a while lower tube helps if you don't fancy playing guess and check with a bunch of springs and using a bunch of air.

[latches109]

I would get the original vs an ACP copy since they are readily available from the local dealers like superman, helion360, & docfire.