Cocker thread's thread

[Jordan]

Anyone know what the ram mounting threads are? Only the ram shaft is posted. I need to know this asap for a project I'm working on.

5/16"-24.

[Snowking63]

Appreciate it!

[Snowking63]

Also please add to the listing what thread pitch the timing rod is. Only the timing rod set screws are noted.

[Snowking63]

It must be 5-40. I checked 6-32 yesterday it was too big and course

[XEMON]

I'll go through and update the first post 😁
Thanks keeping adding to it

[minimag03]

5-40 is used for WGP and Inception rods. 6-32 are used for Shocktech ANS and other aftermarket rrods. You can visually see the difference between the two. 5-40 is creepy fine while 6-32 is noticeably more course

[Schroeder]

Does anyone know the thread fit for the 10-32 threads at the back of the pump arm? I thought the minor diameter is different than a standard 10-32 socket head cap screw or generic fastener. Not all 10-32 threads are the same. The pump arm ones look different.

[Ecapnation]

You're giving paintball companies way way way to much credit.

The tolerances of most equipment are basic threads no class of fit and your lucky at +/-.010 and gd&t forget it

[Jordan]

Does anyone know the thread fit for the 10-32 threads at the back of the pump arm? I thought the minor diameter is different than a standard 10-32 socket head cap screw or generic fastener. Not all 10-32 threads are the same. The pump arm ones look different.

.....huh?

Are you talking about thread engagement?

Regardless, anything cut with a die or tap should work - if you're having troubles installing a pump arm into a backblock, chasing the threads should solve that.

[Schroeder]

.....huh?

Are you talking about thread engagement?

Regardless, anything cut with a die or tap should work - if you're having troubles installing a pump arm into a backblock, chasing the threads should solve that.

No I was talking about thread fit. Not all threads of a given size, like 10-32 in this case, are the same. 1B, 2B, and 3B designations are given for many threads. These fits reference how deep the minor diameter of the threads are and perhaps how big the actual OD is too. I had one guy tell me on FB or somewhere else (I forget where now) that the pump arm 10-32 threads are regular 2B fit.

[XEMON]

Ecap got you the first time:

You're giving paintball companies way way way to much credit.

The same part from the same manufacturer will have different dims, it's within tolerance and mostly fit ... Good enough for them to sell us ...

[Ecapnation]

It really is funny.... More so with modern equipment

Spend 1800 on a gun, 250 on a hopper, 200 on a tank 200 on a better reg for said tank all in the vein attempt to grab performance on shooting a barely toleranced shit grade made in China gel cap

[Dirklax39]

I see that the DYE UL Cocker glide screws are 8/32 Front & 10/32 Rear. BUT I don't know the lengths (I see the post about the lengths and don't understand what it means). Does anyone know...

1. Is 8/32 front & 10/32 rear is correct for the Dye UL cocker frame glide screws?
2. What the lengths are?
3. Any recommendations on where to track those brass glide screws down?

Thank you so much for your help! DM me if you don't want to clog the feed.

- Dirk Sanford