Ecocker leak help

[Fully804]

Ecocker leak at solenoid

I have an 04 prostock i am rebuilding. The gun cycles fine it just has a very small leak at the front of the solenoid. I rebuilt and relubed the solenoid, hpr is in the 300s. I tried switching the qev for a different one. Removed the qev all together, and swapped the noid gasket. Issue still persists. It cycles fine and shoots 280s. Should i try a new noid housing? Or swapping the noid with a spare i have?

[BrendanB]

Is your lpr over pressurized? did you oil your gasket? (they should be dry)

i would start with the lpr.

[Dougpre2k]

I've had a similar leak and it was the small gaskets on the 2 swivel style air fitting ontop of the noid cover.

[Trbo323]

It's almost always the ram. What happens is air bypasses the sail o ring and vents out through the noid. It's not a noid leak as the noid is operating as it should

Take the front hose off and see if the air is coming out of it. If it is, it's a ram problem

Sent from my motorola edge 2024 using Tapatalk

[Fully804]

Update. Rebuilt the ram and still had a leak at the noid. Got a rebuild kit for the noid and bam. No leak. Ty all for the help.