Leaking eblade solenoid.

[SVTCOBRA2003]

Hey y’all. I just put a eblade back on my nightkast to get that ole girl back out to the field. The marker was fine in mech state.. and now that I put the eblade on the solenoid is leaking from what seems to be the gasket area in between the solenoid and the housing. I went through the usual suspects for this problem.. rebuilt lpr - it’s good, new orings on ram. Seems good. Checked manifold gasket. It seems totally fine. Still leaking.. so I went as far as to install a completely different noid and housing I have in the parts bin thinking that would solve the issue. Negative… the other noid leaks all the same. What am I missing here..


Sent from my iPhone using Tapatalk

[Dougpre2k]

I have a similar leak from these style of air fittings. Swapped them for the straight barbs and solved the leak. I have looked but have not found just a replacement seal for these swivel style.

[Buff_phroggie]

Aliexpress has replacement ones. I hate to say it is probably cheaper and easier to replace them

[SVTCOBRA2003]

My leak is from the gasket between the solenoid and the housing. Not the hose barb.


Sent from my iPhone using Tapatalk

[SpazC]

Try dropping your LPR pressure to zero and coming back up slowly.

I had a similar issue and dropping the lpr pressure fixed it

[SVTCOBRA2003]

I have done that multiple times without any luck.


Sent from my iPhone using Tapatalk