Like the title says ive got an empire resurrection with palmers lpr, shocktech 3 way and ram. Dye Laz valve and inception hammer curious if anyone has seen any worthwhile benefits from running an expansion chamber in the front block? Basically stuck working too much and tinkering with guns is closest ive been to the field in a few months.
-
-
I haven't specifically tested it on a Resurrection. But I use them on some full block guns, and often on Minis.
I guess the questions is really what you are hoping to gain.
The larger volume could mean that your pressure drops less in between shots, but if your reg recharges dramatically faster than you can shoot is that an advantage?
If it lets you shoot at a lower pressure, is that an advantage? It probably is already shooting at 200PSI or lower with a Laz valve.
I'll be curious what results you actually get by adding one to that platform since I have not.Need Inception Designs or Shocktech Products? Let me know!
MCB Feedback --------- MCB Consolidated WTB
old PBN feedback -
I have used both the Inception and ATTKTX lpcs (with extender added on) which are similar to the shocktech on a ressy. I have a phat rat in mine so I cannot say what the pressure difference would be with the laz, but I was able to drop 10 psi once (either) lpc was installed. The shocktech style design is way easier to live with and the stainless banjo is much more tolerant of any thread imperfections that might be present in the body.Comment
Comment