Just picked up a Kaos off of Ebay. Is leaking down the barrel and won't re-cock due to a bent valve spring. While shopping for replacement springs I stumbled upon the Zero. Most of the research I have done has led me to believe this was marketed on the higher end Zenith, but has anyone used it on any of the other markers? I am assuming that they are all machined the same.
-
-
ANS website says it is compatible with Blitz and Kaos markers. I have a Zenith, zero system works pretty well. -
The Azodin Kaos-D I used to have came with one. You could effectively change valve spring tension from the front of the gun , as if you were swapping out valve springs, say with a maddman kit. You might need to put a reg on this gun to get the full benefits.'96 RF Mini Cocker, '95 RF Autococker, 68-Automag Classic, Banzai Splash Minimag, Gen-E Matrix, Shoebox Shocker 4x4, Montneel Z-1, Tippmann Pro-Carbine, Tippmann Mini-Lite, Tippmann Model-98, Tippmann 68-Special, Spyder .50 cal Opus/Opus-A , Tippmann .50 Cal Cronus , Gog Enmey .50 cal , Tippmann Vert ASA 68-Carbine, Bob Long Millennium, ICD Grey Green Marble Splash Alleycat Deluxe (runs liquid co2) , Halfblock 2K4 Prostock Autococker , 2K RF Sniper II
Meleager7 Feedback: https://www.mcarterbrown.com/forum/b...ager7-feedback
Mel Eager Productions, Paintball Videos: https://www.youtube.com/@meleagerproductions9082Comment
-
I think I picked up a Kaos 3 given the color scheme. It is the tan and brown. This is my first stacked tube blowback since my fleet of Spyders in the early 2000's.Comment
-
Zero will for any of the Kaos series markers but to actually utilize its benefits you need a regulator. Just as stated above.Comment
Comment