Gen 4 reg seat

[Baader]

I´m slowly going throught my gen4 to get it working again. The reg was spiking and when I pulled it apart the reg seat just crumbled.
So, is there a source for those, or a substitute o-ring that I can use? That one guy on ebay does not ship to FInland.

If there is a place to get a full rebuild on everything that would be even better.

[tyronejk]

Those are the flat rubber discs, right? If you can't find a source, you can probably make your own with a sheet of rubber and a set of hole punches
(https://i5.walmartimages.com/asr/748...1ed0c27c3.jpeg)

[Baader]

Yeah, they´re teflon originally but probably any rubber will do.

[BrickHaus]

Looks like someone has printed ones on ebay for a few bucks.

I'd just go that route. or Id try to print myself new some.

I've had good luck with printed seals in other applications.

[Hobbes]

I assume this was for the HPR, but these kits are available for the LPR now.

https://youtu.be/OAf_8vpJPZg?si=rKGY6O7rccBLWWRd

[Baader]

Thanks, sent him an email, that would be pretty ideal for my situation. They have the HPR too (which is the same as gen 1-2)
Not sure if that spending such an amount on a marker I will play once a year is reasonable but hey, nothing in paintball is.